ADL5610

30 MHz to 6 GHz RF/IF Gain Block
Manufactured by:

Product Details

The ADL5610 is a single-ended RF/IF gain block amplifier that provides broadband operation from 30 MHz to 6 GHz. The ADL5610 provides a low noise figure of 2.2 dB with a very high OIP3 of more than 38 dBm simultaneously, which delivers a high dynamic range. 

The ADL5610 provides a gain of 18 dB, which is stable over frequency, temperature, and power supply, and from device to device. The amplifier is offered in the industry-standard SOT-89 package and is internally matched to 50 Ω at the input and output, making the ADL5610 easy to implement in a wide variety of applications. The only external parts required are the input and output ac coupling capacitors, power supply decoupling capacitors, and bias inductor.

The ADL5610 has a high ESD rating of ±1.5 kV (Class 1C) and is fully specified for operation across a wide temperature range of −40°C to +105°C. 

A fully populated RoHS-compliant evaluation board is available.

Product Lifecycle

checked Recommended for New Designs

This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.

Evaluation Kits

X +

Product Details

ADL5610-EVALZ is a fully populated, 4-layer, FR4-based evaluation board. For normal operation it requires a single 5 V/200 mA power supply. The 5 V power supply should be connected to the test loops  labeled VCC and GND. The RF input is applied to the SMA connector labeled RFIN. The RF output is available at the SMA connector labeled RFOUT.

Tools & Simulations

X +

S-Parameters

Design Tools

Product Recommendations

X +
ADL5610 Companion Parts

Recommended Active Mixers

  • For a high performance PLL with integrated VCO for the active mixers , we recommend the ADF4350 or the ADF4351 .
  • For high IP3, dual channel up/down conversion from 100 MHz to 6 GHz, , we recommend the ADL5802 .
  • For high IP3 performance with RF inputs from 10 MHz to 6 GHz , we recommend the ADL5801 .

Design Resources

X +

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well.  "Zero defects" for shipped products is always our goal.

ADL5610 Material Declaration
PCN-PDN Information Quality And Reliability Symbols and Footprints

Reviews

X+

Overview

1 Review
1 out of 1 (100%) customers recommend this product.
Quality
1
2
3
4
5
Reliability
1
2
3
4
5
Features
1
2
3
4
5

Most Helpful Review

by Winfield
The device is powered through its output transistor's load inductor. The datasheet recommends using a small 0603-size 43nH inductor for above 500MHz,and a larger-value 1000nH inductor for the low-frequency 30-500MHz region. Small inductors have less self-capacitance and the 43nH part should have a very high SRF to work to 6GHz. They don't suggest specific parts. Presumably you'd want an intermediate value to work from say 150MHz to 2GHz A nice trick is to use inductors in series, with the large ones going to the supply and the small low-capacitance ones at the device. There's no need to stop at only two inductors. This is the approach used in wideband bias-T devices.

All Reviews

by Winfield, 8 Dec 13
extended frequency range
The device is powered through its output transistor's load inductor. The datasheet recommends using a small 0603-size 43nH inductor for above 500MHz,and a larger-value 1000nH inductor for the low-frequency 30-500MHz region. Small inductors have less self-capacitance and the 43nH part should have a very high SRF to work to 6GHz. They don't suggest specific parts. Presumably you'd want an intermediate value to work from say 150MHz to 2GHz A nice trick is to use inductors in series, with the large ones going to the supply and the small low-capacitance ones at the device. There's no need to stop at only two inductors. This is the approach used in wideband bias-T devices.
Was this Helpful?Helpful(3)

Sample & Buy

X+
Back
Check Inventory

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.


Price Table Help

 
Evaluation Boards Pricing displayed is based on 1-piece.
Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.