io-homecontrol® Compliant RF Transceiver

Manufactured by:
Available to members of IO Homecontrol only. For more information please contact a local sales office at Analog Devices, Inc.

Product Details

The ADF7022 is a very low power, high performance, highly integrated FSK/GFSK transceiver designed for operation at the three io-homecontrol® channels at 868.25 MHz, 868.95 MHz and 869.85 MHz in the license-free ISM band. The ADF7022 is fully compliant to ETSI-300-220, and is based on the popular ADF7020 transceiver with enhanced digital baseband features specifically designed for the io-homecontrol® standard.

ADF7022 features include:

  • Fully integrated io-homecontrol®-compliant protocol covering
    Layer 1, Layer 2, and time critical elements of Layer 3
    Media access
    Master, slave, and beacon modes supported
    Automatic io-homecontrol channel scan
    Automatic CRC, preamble, start byte insertion/check
    UART data encoding as per io-homecontrol
    Smart preamble detect/packet sniffing
    Automatic address filtering
    Low power modes
  • Very low power consumption
    13 mA in receive mode
    24.1 mA in transmit mode (10 dBm output)
    0.65 μA in RCO wake mode
    1.25 μA in XTO wake mode (32 kHz oscillator active)
    65 μA average current in low power mode (with 2 ms scan time every 0.5 seconds)
  • Receiver sensitivity (10−3 BER)
    −107.5 dBm at 38.4 kbps FSK, 20 kHz deviation
  • Output power programmable up to 13.5 dBm
  • Automatic PA ramping
  • Dual PAs offer Tx antenna diversity
  • Very few external components
    Integrated PLL loop filter
    Integrated Rx/Tx switch
    Integrated battery monitor
    On-chip 8-bit ADC and temperature sensor
  • Efficient and flexible SPI control interface
    4 lines available for low cost microcontroller interface
    Flexible Tx and Rx data buffers
    Efficient burst mode register access
  • 1.8 V to 3.6 V power supply
  • 5 mm × 5 mm, 32-lead LFCSP package
  • Applications

  • Home automation
  • Process and building control
  • Product Lifecycle

    recommend Recommended for New Designs

    This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.

    Evaluation Kits


    X +


    Product Details

    This page contains ordering information for the evaluation board used to evaluate the ADF7022 io-homecontrol® Compliant RF Transceiver.

    Software & Systems Requirements


    Tools & Simulations

    X +

    Design Tools

    Reference Materials

    X +

    Design Resources

    X +

    ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well.  "Zero defects" for shipped products is always our goal.

    ADF7022 Material Declaration
    PCN-PDN Information Quality And Reliability Symbols and Footprints


    Didn't find what you were looking for? Ask the Analog community »

    Sample & Buy

    Check Inventory

    The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

    Price Table Help

    Evaluation Boards Pricing displayed is based on 1-piece.
    Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.