An Overview of the iSensor™ family of products is available.

The ADIS16006 is a low cost, low power, complete dual-axis accelerometer with an integrated serial peripheral interface (SPI). An integrated temperature sensor is also available on the SPI interface. The ADIS16006 measures acceleration with a full-scale range of ±5 g (minimum). The ADIS16006 can measure both dynamic acceleration (vibration) and static acceleration (gravity).

The typical noise floor is 200 µg/√Hz, allowing signals below 1.9 mg (60 Hz bandwidth) to be resolved.

The bandwidth of the accelerometer is set with optional capacitors, CX and CY, at the XFILT pin and the YFILT pin. Digital output data for both axes is available via the serial interface.

An externally driven self-test pin (ST) allows the user to verify the accelerometer functionality.

The ADIS16006 is available in a 7.2 mm × 7.2 mm × 3.7 mm, 12-terminal LGA package.

Applications:

Industrial vibration/motion sensing

Platform stabilization

Dual-axis tilt sensing

Tracking, recording, analysis devices

Alarms and security devices

Part#	Product Description	Output Type	TypicalBand Width (kHz)	Sensing Axes	Voltage Supply (V)	Range	Sensitivity	Sensitivity Accuracy (%)	Temp Range (°C)	Supply Current (max)	Temp Sensor	Package	Price* (1000-4999)
ADIS16003	Dual Axis ±1.7g Accelerometer with SPI Interface	SPI	2.25	X, Y	3 to 5.25	+/- 1.7g	0.001 g/LSB	±7	-40 to 125°C	1.4mA	Yes	7mm x 7mm LGA	$17.96
ADIS16006	Dual Axis ±5g Accelerometer with SPI Interface	SPI	2.25	X, Y	3 to 5.25	+/- 5g	0.004 g/LSB	±6	-40 to 125°C	1.4mA	Yes	7mm x 7mm LGA	$17.96
ADIS16201	Programmable Dual Axis Accelerometer/Inclinometer	SPI	2.25	X, Y	3 to 3.6	+/- 1.7g	0.10 °/LSB	±1	-40 to 125	11mA	Yes	9 mm x 9mm LGA	$24.04
ADIS16203	Programmable Single Axis 360° Inclinometer	SPI	2.25	Z	3 to 3.6	+/- 180°	0.025 °/LSB	-	-40 to 125	11mA	Yes	9 mm x 9mm LGA	$24.04
ADIS16204	Programmable Hi-G Digital Accelerometer, Impact Sensor	SPI	0.4	X, Y	3 to 3.6	+/- 70g X & +/- 37g Y	17.125 mg/LSB	-	-40 to 105°C	12mA	Yes	9 mm x 9mm LGA	$21.20
ADIS16209	High Accuracy (0.1°), Dual-Axis Digital Accelerometer/Inclinometer	SPI	0.05	X, Y or Z	3 to 3.6	+/- 90° or +/- 180°	0.025 °/LSB	±0.4	-40 to 125°C	14mA	Yes	9 mm x 9mm LGA	$34.81

* The pricing listed here is provided only for budgetary purposes as recommended list price in U.S. Dollars in the United States ex factor per unit for the stated volume. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
** Pricing is currently unavailable. Click on the product number to see the Product Page for additional information.

The model number is a specific version of a generic that can be purchased or sampled.

Status indicates the current lifecycle of the product. This can be one of 4 stages:

• Pre-Release: The model has not been released to general production, but samples may be available.
• Production: The model is currently being produced, and generally available for purchase and sampling.
• Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
• Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).

The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

For detailed drawings and chemical composition please consult our  Package Site

Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

This is the acceptable operating range of the device. The various ranges specified are as follows:

• Commercial: 0 to +70 degrees Celsius
• Military : -55 to +125 degrees Celsius
• Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
• Automotive: -40 to +125 degrees Celsius

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.

Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.