ADSP-BF607:
Blackfin Dual-Core Processor up to 1GHz for High Performance Digital Signal Processing Applications
Pre-Release: This product is new and engineering validation may still be underway. Quantities may be limited and design specifications may change while we ready the product for release to production.
Recommended for New Designs: This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.
Production: At least one model within this product family is in production and available for purchase. The product is appropriate for new designs but newer alternatives may exist.
Not Recommended for New Designs: This designates products ADI does not recommend broadly for new designs.
Last Time Buy: All products in this family will be obsolete soon. Please contact ADI Sales or Distributors to arrange for final purchases and read our Obsolescence Information to review the time periods for placing final orders and receiving final shipments.
Obsolete: The models in this product family are no longer available.
The dual-core ADSP-BF607 Blackfin processor is optimized for a broad range of industrial, instrumentation, medical, and consumer applications demanding complex control and signal processing tasks while maintaining extremely high data throughput.
Features include a high performance enhanced infrastructure, large on-chip memory and a feature rich peripheral set with expanded connectivity options including USB 2.0 HS OTG, 2 10/100 Ethernet MACs, and Removable Storage Interface (RSI).
In addition to these the ADSP-BF607 processor contains features for safety-critical applications, including a CRC for memory protection, Parity and ECC protection in the internal memory blocks and a Fault Management Unit.
2 Blackfin cores capable of 500 MHz/1000 MMACs (2000 MMACs total) for demanding signal processing applications.
552 K bytes of on-chip SRAM composed of 148kB of L1 SRAM per core with parity support and a shared L2 256kB SRAM with ECC support.
Fully integrated DMA controller supporting DMA transfers to and from all on-chip and off-chip memories and peripherals.
3x Enhanced Parallel Peripheral Interfaces (ePPIs) supporting up to 24-bit data widths, ITU-R BT.656 modes, and direct connection to TFT LCD panels, parallel converters, video encoders and decoders, image sensors, and other general-purpose peripherals.
3 synchronous serial ports (SPORTs) supporting I2S, Packed I2S, left-justified sample pair, and TDM modes.
USB 2.0 HS OTG.
Removable Storage Interface (RSI).
Controller Area Network (CAN) Interface.
2 10/100 Ethernet MACs with IEEE 1588 support.
4 Link Ports supporting 8-bit wide DMA enabled data transfer.
2 Watch Dog Timers and 8 Timer/Counters with PWM support.
CRC engine.
2 SPI-compatible ports supporting master and slave modes.
2 UART and 2 Two-Wire Interfaces.
2 16-bit Pulse Width Modulation (PWM) channels.
19x19 mm CSP BGA package.
Commercial and Industrial temperature ranges available.
Functional Block Diagram for ADSP-BF607 Blackfin Dual-Core Processor up to 1GHz for High Performance Digital Signal Processing Applications
Functional Block Diagram for the ADSP-BF60x Family
Introducing the Blackfin ADSP-BF60x Processors
This video describes the new ADSP-BF60x series of high-performance Blackfin Processors. The BF608 and 609 are optimized for embedded vision applications and the BF606 and 607 are optimized for high-performance general purpose DSP applications.
CrossCore® Embedded Studio for Analog Devices Processors
CrossCore Embedded Studio is a world-class integrated development environment (IDE) for the Analog Devices Blackfin® and SHARC® processor families. This Eclipse™ based, highly visual IDE enables seamless, intuitive code generation and debug support for both proprietary and open source tools and technologies.