-
Products
- Amplifiers and Comparators
- Analog Microcontrollers
- Analog to Digital Converters
- Audio/Video Products
- Broadband Products
- Clock and Timing
- Digital to Analog Converters
- Embedded Processing and DSP
- Fiber/Optic
- Interface
- MEMS
- Power Management
- References
- RF/IF Components
- Sensors
- Switches/Multiplexers
- Temperature Sensing and Thermal Management
- Other Products
- Analog/HDMI/DVI Interfaces
- Audio A/D Converters
- Audio Amplifiers
- Audio CODECs
- Audio D/A Converters
- Audio Signal Processors
- Camera/Camcorder Analog Front Ends
- Display Driver Electronics
- iMEMS® Microphone
- Lens Driver Components
- Mobile TV Tuners
- Sample Rate Converters
- Video Amps/Buffers/Filters
- Video CODECs
- Video Compression
- Video Decoders
- Video Encoders
OTHERS WAYS
TO FIND PRODUCTSSelection Guides Product Selection Tables - Resources & Tools
-
About ADI
- My Analog
NEWS
- 18 Dec 2009 Analog Devices Completes Strategic Manufacturing Upgrades.
-
16 Dec 2009
Industry’s Smallest Dual Buck Regulator
Reduces Component Count and Board Space in Portable Systems. -
19 Nov 2009
MOSFET Drivers Improve Efficiency
with High Switching Speeds and Overtemperature Protection.
NEW PRODUCTS
-
ADP125- 5.5V Input, 500 mA, Low Quiescent Current, CMOS Linear Regulator w/External Voltage Divider
The ADP124/ADP125 are low quiescent current, low dropout linear regulators. They are designed to operate from an input voltage between 2.3 V and 5.5 V and to provide up to 500 mA of output current. The low 130 mV dropout voltage at a 500 mA load improves efficiency and allows operation over a wide input voltage range.
The low 210 μA More
Data Sheet Rev 0, 01/2010 (pdf 669kB)
-
ADP124- 5.5V Input, 500 mA, Low Quiescent Current, CMOS Linear Regulator w/31 Fixed-output Voltages
The ADP124/ADP125 are low quiescent current, low dropout linear regulators. They are designed to operate from an input voltage between 2.3 V and 5.5 V and to provide up to 500 mA of output current. The low 130 mV dropout voltage at a 500 mA load improves efficiency and allows operation over a wide input voltage range.
The low 210 μA More
Data Sheet Rev 0, 01/2010 (pdf 669kB)
-
ADP5587- Mobile I/O Expander and QWERTY Keypad Controller
The ADP5587 is an I/O port expander and keypad matrix designed for QWERTY type phones that require a large keypad matrix and expanded I/O lines. I/O expander ICs are used in mobile platforms as a solution to the limited number of GPIOs available in the main processor.
In its small 4 mm × 4 mm package, the ADP5587 contains enough power to handle all key-scanning and decoding and to flag the More
Data Sheet Rev 0, 12/2009 (pdf 333kB)
-
ADP5022- Dual 3 MHz, 600 mA Buck Regulator with 150 mA LDO
The ADP5022 is a micro power management unit (micro PMU) that combines two high performance buck regulators and a low dropout regulator (LDO) in a tiny 16-ball 2.08 mm × 2.08 mm WLCSP to meet demanding performance and board space requirements.
The high switching frequency of the buck regulators enables tiny multilayer external components and minimizes the board space required. When the More
Data Sheet Rev A, 12/2009 (pdf 676kB)
- More... Subscribe to New Products Feed
