Add to Signal Chain Designer

ADM3053:  Signal and Power Isolated CAN Transceiver with Integrated Isolated DC-to-DC Converter

Product Details

Product Status:Recommended for New Designs

The ADM3053 is an isolated controller area network (CAN) physical layer transceiver with an integrated isolated dc-to-dc converter. The ADM3053 complies with the ISO 11898 standard.

The device employs Analog Devices, Inc., iCoupler® technology to combine a 2-channel isolator, a CAN transceiver, and Analog Devices isoPower® dc-to-dc converter into a single SOIC surface mount package. An on-chip oscillator outputs a pair of square waveforms that drive an internal transformer to provide isolated power. The device is powered by a single 5 V supply realizing a fully isolated CAN solution.

The ADM3053 creates a fully isolated interface between the CAN protocol controller and the physical layer bus. It is capable of running at data rates of up to 1 Mbps.

The device has current limiting and thermal shutdown features to protect against output short circuits. The part is fully specified over the industrial temperature range and is available in a 20-lead, wide-body SOIC package.

The ADM3053 contain isoPower® technology that uses high frequency switching elements to transfer power through the transformer. Special care must be taken during printed circuit board (PCB) layout to meet emissions standards. Refer to Application Note AN-0971, Control of Radiated Emissions with isoPower® Devices, for details on board layout considerations.

Applications

  • CAN Data Buses
  • Industrial Field Networks

FEATURES and BENEFITS

  • 2.5 kV rms signal and power isolated CAN transceiver
  • isoPower® integrated isolated dc-to-dc converter
  • 5V operation on VCC
  • 5 V or 3.3 V operation on VIO
  • Complies with ISO 11898 standard
  • High speed data rates up to 1 Mbps
  • Unpowered nodes do not disturb the bus
  • Connect 110 or more nodes on the bus
  • Slope Control for reduced EMI
  • Thermal shutdown protection
  • High common-mode transient immunity: >25 kV/μs
  • Safety and regulatory approvals (pending)
    UL recognition
    2500 V rms for 1 minute per UL 1577
    See data sheet for additional features

Functional Block Diagram for ADM3053

Documentation

Title Content Type File Type
ADM3053: Signal and Power Isolated CAN Transceiver with Integrated Isolated DC-to-DC Converter Data Sheet (Rev B, 02/2013) (pdf, 258 kB) Data Sheets PDF
AN-1176: Component Footprints and Symbols in the Binary .Bxl File Format  (pdf, 671 kB) Application Notes PDF
AN-1123: Controller Area Network (CAN) Implementation Guide  (pdf, 204 kB) Application Notes PDF
AN-0971: Recommendations for Control of Radiated Emissions with isoPower Devices  (pdf, 406 kB) Application Notes PDF
ADM3052/ADM3053: Fully Isolated CAN
The ADM3052 is an isolated controller area network (CAN) physical layer transceiver with a V+ integrated linear regulator. The ADM3052 complies with the ISO 11898 standard.
Videos HTML
UG-461: ezLINX iCoupler Isolated Interface Development Environment  (pdf, 1915 kB) User Guides PDF
UG-400: ezLINX™ iCoupler® Isolated Interface Development Environment  (pdf, 393 kB) User Guides PDF
UG-234: Evaluation Board for the ADM3053 with Integrated DC-to-DC Converter  (pdf, 489 kB) User Guides PDF
MS-2678: Optimizing CAN Node Bit Timing to Accomodate Digital Isolator Propagation Delays  (pdf, 622 kB) Technical Articles PDF
MS-2127: Designing with iCoupler Digital Isolators in Solar PV Inverters  (pdf, 141 kB) Technical Articles PDF
ADM3052/ADM3053: Industry's First Signal and Power Isolated CAN Transceivers  (pdf, 758 kB) Overview PDF
isoPower® - Isolated dc-to-dc Power in the smallest Package Overview HTML
Industrial ICs
Industrial ICs Solutions Bulletin, Volume 10, Issue 8
Solutions Bulletins HTML
RAQs index Rarely Asked Questions HTML
Glossary of EE Terms Glossary HTML

Design Tools,Models,Drivers & Software

Title Content Type File Type
ADM3053 IBIS Model  (ibs) IBIS Models IBS

Evaluation Kits & Symbols & Footprints

Evaluation Boards & KitsView the Evaluation Boards and Kits page for documentation and purchasing

Symbols and Footprints— Analog Devices offers Symbols & Footprints which are compatible with a large set of today’s CAD systems for broader and easier support.

SampleSample & Buy

Price, packaging, availability

ADM3053 Model Options
Model Package Pins Temp.
Range
Packing,
Qty
Price*(100-499) Price*1000 pcs RoHS View PCN/ PDN Check Inventory/
Purchase/Sample
ADM3053BRWZ Status: Production 20 ld SOIC - Wide 20 Ind Tube, 37 $6.47 $5.50 Y  Material Info PCN Purchase Sample
ADM3053BRWZ-REEL7 Status: Production 20 ld SOIC - Wide 20 Ind Reel, 400 $6.47 $5.50 Y  Material Info PCN Purchase
Price Table Help

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

ezLINX™ iCoupler® Isolated Interface Development Environment
Model Description Price RoHS View PCN/ PDN Check Inventory/
Purchase/Sample
EZLINX-IIIDE-EBZ Status: Production iCoupler® Isolated Interface Development Environment Evaluation Board $149.00 Yes -
ADM3053 Evlauation Board
Model Description Price RoHS View PCN/ PDN Check Inventory/
Purchase/Sample
EVAL-ADM3053EBZ Status: Production Evaluation Board $75.00 Yes -

Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.

Check Inventory & Purchase

View Sales and Distribution Offices

沪ICP备09046653号
content here.
content here.

Review this Product

Close