ADL6331

RECOMMENDED FOR NEW DESIGNS

0.38 GHz to 15 GHz TxVGA

Viewing:

Overview

  • Broadband TxVGA interfacing RF-DAC to beamformer and PA
  • Operating frequency range: 0.38 GHz to 15 GHz, 2 product variants
    • ADL6331-A: 0.38 GHz to 8.0 GHz
    • ADL6331-B: 1.0 GHz to 15.0 GHz
  • Optimizes common-mode rejection of RF-DAC, even-order harmonics, and intermodulation
  • 50 Ω differential inputs and 50 Ω single-ended outputs
  • Integrated broadband RF output balun
  • 70 dB of gain control range in 1 dB step
  • RF DSA range: 24.0 dB with 1.0 dB step
  • Amplifier bypass loss of 12 dB each
  • Asynchronous toggle between multiple pre-defined attenuation values and bypass amplifier stages.
  • Power gain at 4 GHz: 15.5 dB (ADL6331-A), 15.8 dB (ADL6331-B)
  • Noise figure at 4 GHz: 7.5 dB (ADL6331-A), 8.1 dB (ADL6331-B)
  • OIP3 at 4 GHz: 32.8 dBm (ADL6331-A), 31.8 dBm (ADL6331-B)
  • OIP2 at 4 GHz: 59.7 dBm (ADL6331-A), 56.2 dBm (ADL6331-B)
  • OP1dB at 4 GHz: 12.2 dBm (ADL6331-A), 12.3 dBm (ADL6331-B)
  • Fully programmable through a 3- or 4-wire SPI
  • Single 3.3 V supply
  • 24-terminal, 4.0 mm × 4.0 mm land grid array (LGA)

The ADL6331 transmit variable gain amplifier (TxVGA) provides an interface from RF digital-to-analog converters (RF DACs) to a singled-ended power amplifier (PA) signal chain. Each ADL6331 IC is composed of a balun, two differential RF amplifiers with bypass attenuators, and a digital step attenuator (DSA) to provide suitable transmitter performance in a 24-terminal, 4.0 mm x 4.0 mm LGA package.

Serial-port interface (SPI) control is available to configure RF signal paths or to optimize supply current vs. performance.

An integrated RF balun is used to provide a single-ended output over 0.38 GHz to 8.0 GHz (ADL6331-A) or 1.0 GHz to 15.0 GHz (ADL6331-B) with good impedance match.

Applications

  • Aerospace and defense
  • Instrumentation and test equipment
  • Communication systems
  • ADL6331
    0.38 GHz to 15 GHz TxVGA
    ADL6331 - Chip Image ADL6331 Functional Block Diagram ADL6331 Pin Configuration
    Add to myAnalog

    Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

    Create New Project
    Ask a Question

    Documentation

    Learn More
    Add to myAnalog

    Add media to the Resources section of myAnalog, to an existing project or to a new project.

    Create New Project

    Software Resources

    Can't find the software or driver you need?

    Request a Driver/Software

    Hardware Ecosystem

    Parts Product Life Cycle Description
    LDO Linear Regulators 1
    LTM4709 RECOMMENDED FOR NEW DESIGNS Triple 3A, Ultralow Noise, High PSRR, Ultrafast μModule Linear Regulator with Configurable Output Array
    Modal heading
    Add to myAnalog

    Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

    Create New Project

    Tools & Simulations

    LTspice

    LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.


    Evaluation Kits

    eval board
    EVAL-ADL6331

    Evaluating the ADL6331, 0.38 GHz to 15 GHz Transmitter VGA

    Features and Benefits

    • Full featured evaluation board for the ADL6331-EVALZA
    • Single-supply operation
    • Easy to use interface with Analysis | Control | Evaluation (ACE) software

    Product Details

    The ADL6331-EVALZA evaluation board allows the manual control of the ADL6331 through the USB port on a Microsoft® Windows® PC via an SDP-S interface board.

    Additional information on the ADL6331 is provided in the ADL6331 data sheet. Consult the data sheet in conjunction with this user guide when using the ADL6331-EVALZA evaluation board.

    EVAL-ADL6331
    Evaluating the ADL6331, 0.38 GHz to 15 GHz Transmitter VGA
    ADL6331-EVALZ Board Photo Angle View ADL6331-EVALZ Board Photo Top View ADL6331-EVALZ Board Photo Bottom View

    Latest Discussions

    No discussions on ADL6331 yet. Have something to say?

    Start a Discussion on EngineerZone®

    Recently Viewed