LTC3552-1

PRODUCTION

Standalone Linear Li-Ion Battery Charger and Dual Synchronous Buck Converter

Data Sheet Product Selection Table
Viewing:

Overview

  • Programmable Charge Current Up to 950mA
  • Complete Linear Charger and Dual DC/DC Regulator
  • Dual Fixed Outputs:
    • 1.8V at 800mA
    • 1.575V at 400mA
  • No MOSFET, Sense Resistor or Blocking Diode Required
  • Thermal Regulation Maximizes Charge Rate Without Risk of Overheating*
  • Charges Directly from a USB Port
  • Programmable Charge Current Termination
  • Preset 4.2V Charge Voltage with ±1% Accuracy
  • Charge Current Monitor Output for Gas Gauging*
  • Automatic Recharge
  • Charge Status Output
  • “Power Present” Output
  • Soft-Start Limits Inrush Current
  • Low Quiescent Current Buck Converter (40μA)
  • Current Mode Operation, Constant Frequency (2.25MHz)
  • Low Profi le (5mm × 3mm × 0.75mm) DFN Package

The LTC3552-1 is a complete constant-current/constant-voltage linear charger and dual fixed output DC/DC converter for single cell lithium-ion batteries. Its DFN package and low external component count make the LTC3552-1 ideally suited for portable applications. Furthermore, the LTC3552-1 is designed to work within USB power specifications.

No external sense resistor or external blocking diode are required due to the internal MOSFET architecture. The charge voltage is fixed at 4.2V and the charge current is programmed with a resistor. The charge cycle terminates when the charge current drops below the programmed termination threshold after the final float voltage is reached. When the input supply (wall adapter or USB supply) is removed, the LTC3552-1 enters a low current state dropping the battery drain current to less than 2μA. Thermal regulation maximizes charge rate without risk of overheating.

The synchronous step-down switching regulators generate fixed output voltages of 1.8V and 1.575V. The switching frequency is set at 2.25MHz, allowing the use of small surface mount inductors and capacitors.


 VOUT
LTC3552   Adjustable (0.6V to 5V)
LTC3552-1 1.8V & 1.575V

Applications

  • Cellular Telephones, PDAs, MP3 Players
  • Bluetooth Applications
LTC3552-1
Standalone Linear Li-Ion Battery Charger and Dual Synchronous Buck Converter
Single Cell Li-Ion Battery Charger with C/5 Termination and Dual DC/DC Converter Efficiency Curve/ Power Loss of Regulators Product Package 1
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet 1

Reliability Data 1

Data Sheet

This is the most up-to-date revision of the Data Sheet.

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Tools & Simulations

LTspice

Models for the following parts are available in LTspice:

  • LTC3552
  • LTC3552-1
LTspice

LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.

Latest Discussions

No discussions on LTC3552-1 yet. Have something to say?

Start a Discussion on EngineerZone®

Recently Viewed