MAX6510

PRODUCTION

Resistor-Programmable SOT Temperature Switches

Resistor-Programmable Temp Comparators in a SOT23!

Data Sheet (Rev. 5) Product Selection Table
Viewing:

Overview

  • ±0.5°C Threshold Accuracy
  • ±4.7°C (max) Threshold Accuracy (-40°C to +125°C)
  • Temperature Threshold Set by a 1% External Resistor
  • Set-Hot or Set-Cold Option
  • Low 32µA Supply Current
  • Open-Drain, Push-Pull Outputs; Open-Drain with Internal Pull-Up Resistor
  • Pin-Selectable 2°C or 10°C Hysteresis
  • SOT23 Packages

The MAX6509/MAX6510 are fully integrated, resistor-programmable temperature switches with thresholds set by an external resistor. They require only one external resistor to set the temperature threshold within a wide -40±C to +125±C temperature range. The MAX6509 provides an open-drain output. The MAX6510 features three selectable output options: active-low, active-high, and open drain with an internal pull-up resistor.
These switches operate with a +2.7V to +5.5V single supply while providing a temperature threshold accuracy of ±0.5°C (typ) or ±4.7°C (max). They typically consume 32µA supply current. Hysteresis is pin selectable to 2°C or 10°C.
The MAX6509/MAX6510 are available in 5-pin and 6-pin SOT23 packages, respectively.

Applications

  • µP Temperature Monitoring in High-Speed Computers
  • Fan Control
  • Temperature Alarms
  • Temperature Control
MAX6510
Resistor-Programmable SOT Temperature Switches
MAX6509, MAX6510: Typical Operating Circuit
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet 1

Reliability Data 1

Design Note 1

Technical Articles 1

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Latest Discussions

No discussions on MAX6510 yet. Have something to say?

Start a Discussion on EngineerZone®

Recently Viewed