MAX4486

PRODUCTION

Single/Dual/Quad, Low-Cost, Single-Supply 7MHz, Rail-to-Rail Op Amps

High-Speed/Low-Cost Op Amp Family Features Single in SC70-5 Package and a Dual in 8-pin SOT23

Data Sheet (Rev. 2) Product Selection Table
Viewing:

Overview

  • 7MHz Unity-Gain Stable Bandwidth
  • Stable for Capacitive Loads up to 100pF
  • +2.7V to +5.5V Single-Supply Voltage Range
  • Ground-Sensing Inputs
  • Outputs Swing Rail-to-Rail
  • No Phase Reversal for Overdriven Inputs
  • 85dB AVOL with 2kΩ Load
  • 0.01% THD with 2kΩ Load
  • Available in Space-Saving Packages
    • 5-Pin SC70 (MAX4484)
    • 8-Pin SOT23 (MAX4486)

The MAX4484/MAX4486/MAX4487 single/dual/quad low-cost general-purpose op amps operate from a single +2.7V to +5.5V supply. The op amps are unity-gain stable with a 7MHz gain-bandwidth product, capable of driving an external 2kΩ load with rail-to-rail output swing. The amplifiers are stable with capacitive loads of up to 100pF. The MAX4484/MAX4486/MAX4487 are specified from -40°C to +125°C, making them suitable for a variety of harsh environments.

The single MAX4484 is available in the ultra-small 5-pin SC70, while the dual MAX4486 is packaged in the space-saving 8-pin SOT23 and µMAX® packages. The quad MAX4487 is available in the 14-pin SO and TSSOP packages.

Applications

  • Base Station/Wireless Infrastructure
  • Computers: Desktops, Workstations, and Servers
  • Computers: Motherboards
  • Computers: Notebook
  • Electronic Ignition Modules
  • Industrial: Process Measurement and Control
  • Infrared Receivers for Remote Controls
  • Instruments and Terminals
  • Panel Meters
  • Portable Communicators
  • Programmable Logic Controllers (PLCs)
  • Sensor Signal Detection
  • Single-Supply Zero-Crossing Detectors
MAX4486
Single/Dual/Quad, Low-Cost, Single-Supply 7MHz, Rail-to-Rail Op Amps
MAX4484, MAX4486, MAX4487: Pin Configurations
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet 1

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Hardware Ecosystem

Parts Product Life Cycle Description
Operational Amplifiers (Op Amps) 8
MAX4400
PRODUCTION Single/Dual/Quad, Low-Cost, Single-Supply, Rail-to-Rail Op Amps with Shutdown
MAX4480
PRODUCTION Single/Dual/Quad, Low-Cost, Single-Supply, Rail-to-Rail Op Amps with Shutdown
MAX4401
PRODUCTION Single/Dual/Quad, Low-Cost, Single-Supply, Rail-to-Rail Op Amps with Shutdown
MAX4481
PRODUCTION Single/Dual/Quad, Low-Cost, Single-Supply, Rail-to-Rail Op Amps with Shutdown
MAX4402
PRODUCTION Single/Dual/Quad, Low-Cost, Single-Supply, Rail-to-Rail Op Amps with Shutdown
MAX4482
PRODUCTION Single/Dual/Quad, Low-Cost, Single-Supply, Rail-to-Rail Op Amps with Shutdown
MAX4403
PRODUCTION Single/Dual/Quad, Low-Cost, Single-Supply, Rail-to-Rail Op Amps with Shutdown
MAX4483
PRODUCTION Single/Dual/Quad, Low-Cost, Single-Supply, Rail-to-Rail Op Amps with Shutdown
Modal heading
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project

Tools & Simulations

SPICE Model 1

Latest Discussions

No discussions on MAX4486 yet. Have something to say?

Start a Discussion on EngineerZone®

Recently Viewed