MAX4212

PRODUCTION

Miniature, 300MHz, Single-Supply, Rail-to-Rail Op Amps with Enable

Data Sheet (Rev. 3) Product Selection Table
Viewing:

Overview

  • High Speed:
    • 300MHz -3dB Bandwidth (MAX4212/MAX4213)
    • 200MHz -3dB Bandwidth (MAX4216/MAX4218/MAX4220)
    • 50MHz 0.1dB Gain Flatness (MAX4212/MAX4213)
    • 600V/µs Slew Rate
  • Single 3.3V/5.0V Operation
  • Rail-to-Rail Outputs
  • Input Common-Mode Range Extends Beyond VEE
  • Low Differential Gain/Phase: 0.02%/0.02°
  • Low Distortion at 5MHz:
    • -78dBc SFDR
    • -75dB Total Harmonic Distortion
  • High-Output Drive: ±100mA
  • 400µA Shutdown Capability (MAX4213/MAX4218)
  • High-Output Impedance in Off State (MAX4213/MAX4218)
  • Space-Saving SOT23, µMAX, or QSOP Packages

The MAX4212/MAX4213 single, MAX4216 dual, MAX4218 triple, and MAX4220 quad op amps are unity-gain-stable devices that combine high-speed performance with Rail-to-Rail outputs. The MAX4213/MAX4218 have a disable feature that reduces power- supply current to 400µA and places the outputs into a high-impedance state. These devices operate from a 3.3V to 10V single supply or from ±1.65V to ±5V dual supplies. The common-mode input voltage range extends beyond the negative power-supply rail (ground in single-supply applications).

These devices require only 5.5mA of quiescent supply current while achieving a 300MHz -3dB bandwidth and a 600V/µs slew rate. Input-voltage noise is only 10nV√Hz and input-current noise is only 1.3pA√Hz for either the inverting or noninverting input. These parts are an excellent solution in low-power/low-voltage systems that require wide bandwidth, such as video, communications, and instrumentation. In addition, when disabled, their high-output impedance makes them ideal for multiplexing applications.

The MAX4212 comes in a miniature 5-pin SOT23 package, while the MAX4213/MAX4216 come in 8-pin µMAX® and SO packages. The MAX4218/MAX4220 are available in space-saving 16-pin QSOP and 14-pin SO packages.

Applications

  • Analog-to-Digital Converter Interface
  • Battery-Powered Instruments
  • CCD Imaging Systems
  • Video Line Driver
  • Video Routing and Switching Systems
MAX4212
Miniature, 300MHz, Single-Supply, Rail-to-Rail Op Amps with Enable
MAX4212, MAX4213, MAX4216, MAX4218, MAX4220: Typical Operating Circuit
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet 1

Technical Articles 2

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Tools & Simulations

SPICE Model 1

Evaluation Kits

MAX4213EVKIT

Evaluation Kit for the MAX4213 and MAX4215

Buy Now View Details

Features and Benefits

  • 300MHz -3dB Bandwidth
  • 600V/µs Slew Rate
  • Single 3.3V/5V Operation
  • Rail-to-Rail Outputs
  • Fully Assembled and Tested

Product Details

The MAX4213 evaluation kit (EV kit) simplifies evaluation of the MAX4213 high-speed, single-supply amplifier with rail-to-rail outputs. The EV kit circuit demonstrates the MAX4213 in the noninverting unity-gain configuration, in either single- or dual-supply mode.

This EV kit may also be used to evaluate the MAX4215 high-speed, rail-to-rail buffer. Contact Maxim to order a free sample.

Applications

  • ADC Interface
  • Battery-Powered Applications
  • CCD Imaging
  • Video Line Driver
  • Video Routing and Switching Systems
MAX4213EVKIT
Evaluation Kit for the MAX4213 and MAX4215

Latest Discussions

No discussions on MAX4212 yet. Have something to say?

Start a Discussion on EngineerZone®

Recently Viewed