LTC3565
Info: : PRODUCTION
searchIcon
cartIcon

LTC3565

1.25A, 4MHz, Synchronous Step-Down DC/DC Converter

Show More showmore-icon

Info: : PRODUCTION tooltip
Info: : PRODUCTION tooltip
Part Models 8
1ku List Price Starting From $2.43
Features
  • High Efficiency: Up to 95%
  • VIN Range: 2.5V to 5.5V
  • High Frequency Operation: Up to 4MHz
  • Selectable Low Ripple (Typical 25mVp-p) Burst Mode® Operation: IQ = 40μA
  • Stable with Ceramic Capacitors
  • Uses Tiny Capacitors and Inductor
  • Low RDS(ON) Internal Switches: 0.15Ω
  • Current Mode Operation for Excellent Line and Load Transient Response
  • Short-Circuit Protected
  • Low Dropout Operation: 100% Duty Cycle
  • Low Shutdown Current: IQ ≤ 1μA
  • Output Voltages from 0.6V to 5V
  • Synchronizable to External Clock
  • Supports Pre-Biased Outputs
  • Small 10-Lead (3mm × 3mm) DFN or MSOP Package
Additional Details
show more Icon

The LTC3565 is a constant frequency, synchronous step-down DC/DC converter. Intended for medium power applications, it operates from a 2.5V to 5.5V input voltage range and has a user-configurable operating frequency up to 4MHz, allowing the use of tiny, low cost capacitors and inductors 1mm or less in height. The output voltage is adjustable from 0.6V to 5.5V. Internal synchronous power switches provide high efficiency. The LTC3565’s current mode architecture and external compensation allow the transient response to be optimized over a wide range of loads and output capacitors.

The LTC3565 can be configured for automatic power saving Burst Mode operation (IQ = 40μA) to reduce gate charge losses when the load current drops below the level required for continuous operation. For reduced noise and RF interference, the SYNC/MODE pin can be configured to skip pulses or provide forced continuous operation.

To further maximize battery life, the P-channel MOSFET is turned on continuously in dropout (100% duty cycle). In shutdown, the device draws <1μA.

Applications

  • Notebook Computers
  • Digital Cameras
  • Cellular Phones
  • Handheld Instruments
  • Board Mounted Power Supplies
Part Models 8
1ku List Price Starting From $2.43

close icon

Documentation

Video

Part Model Pin/Package Drawing Documentation CAD Symbols, Footprints, and 3D Models
LTC3565EDD#PBF
  • HTML
  • HTML
LTC3565EDD#TRPBF
  • HTML
  • HTML
LTC3565EMSE#PBF
  • HTML
  • HTML
LTC3565EMSE#TRPBF
  • HTML
  • HTML
LTC3565IDD#PBF
  • HTML
  • HTML
LTC3565IDD#TRPBF
  • HTML
  • HTML
LTC3565IMSE#PBF
  • HTML
  • HTML
LTC3565IMSE#TRPBF
  • HTML
  • HTML

Filter by Model

reset

Reset Filters

Part Models

Product Lifecycle

PCN

Feb 4, 2020

- 20_0130

Laser Top Mark Conversion for 10-Lead MSOP Packages Assembled in ADPG and UTAC

LTC3565EMSE#PBF

PRODUCTION

LTC3565EMSE#TRPBF

PRODUCTION

LTC3565IMSE#PBF

PRODUCTION

LTC3565IMSE#TRPBF

PRODUCTION

Filter by Model

reset

Reset Filters

Part Models

Product Lifecycle

PCN

Feb 4, 2020

- 20_0130

arrow down

Laser Top Mark Conversion for 10-Lead MSOP Packages Assembled in ADPG and UTAC

LTC3565EMSE#PBF

PRODUCTION

LTC3565EMSE#TRPBF

PRODUCTION

LTC3565IMSE#PBF

PRODUCTION

LTC3565IMSE#TRPBF

PRODUCTION

Software & Part Ecosystem

Evaluation Kits 1

reference details image

DC1159A

LTC3565EDD Demo Board | 1.25A, 4MHz, Synchronous Step-Down DC/DC Converter

Tools & Simulations 2

LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.

To launch ready-to-run LTspice demonstration circuits for this part:

Step 1: Download and install LTspice on your computer.

Step 2: Click on the link in the section below to download a demonstration circuit.

Step 3: If LTspice does not automatically open after clicking the link below, you can instead run the simulation by right clicking on the link and selecting “Save Target As.” After saving the file to your computer, start LTspice and open the demonstration circuit by selecting ‘Open’ from the ‘File’ menu.

Recently Viewed