LT6207

Obsolete

Quad Single Supply 3V, 100MHz Video Op Amps

Data Sheet Product Selection Table
Viewing:

Overview

  • 450V/μs Slew Rate
  • 100MHz Gain Bandwidth Product
  • Wide Supply Range 2.7V to 12.6V
  • Output Swings Rail-to-Rail
  • Input Common Mode Range Includes Ground
  • High Output Drive: 50mA
  • Channel Separation: 90dB at 10MHz
  • Specified on 3V, 5V and ±5V Supplies
  • Input Offset Voltage: 1mV
  • Low Power Dissipation: 20mW per Amplifier on Single 5V
  • Operating Temperature Range: –40°C to 125°C
  • Low Profile (1mm) SOT-23 (ThinSOT™) Package

The LT6205/LT6206/LT6207 are low cost single/dual/quad voltage feedback amplifiers that feature 100MHz gain-bandwidth product, 450V/μs slew rate and 50mA output current. These amplifiers have an input range that includes ground and an output that swings within 60mV of either supply rail, making them well suited for single supply operation.

These amplifiers maintain their performance for supplies from 2.7V to 12.6V and are specified at 3V, 5V and ±5V. The inputs can be driven beyond the supplies without damage or phase reversal of the output. Isolation between channels is high, over 90dB at 10MHz.

The LT6205 is available in the 5-pin SOT-23, and the LT6206 is available in an 8-lead MSOP package with standard op amp pinouts. For compact layouts the quad LT6207 is available in the 16-pin SSOP package. These devices are specified over the commercial, industrial and automotive temperature ranges.

Applications

  • Video Line Driver
  • Automotive Displays
  • RGB Amplifiers
  • Coaxial Cable Drivers
  • Low Voltage High Speed Signal Processing
LT6207
Quad Single Supply 3V, 100MHz Video Op Amps
Baseband Video Splitter/Cable Driver Output Step Response Product Package 1 Product Package 2 Product Package 3
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet 1

Reliability Data 1

Design Note 1

Technical Articles 1

Data Sheet

This is the most up-to-date revision of the Data Sheet.

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Tools & Simulations

LTspice

Models for the following parts are available in LTspice:

  • LT6207
LTspice

LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.

Latest Discussions

No discussions on LT6207 yet. Have something to say?

Start a Discussion on EngineerZone®

Recently Viewed