LT6018: 33V, Ultralow Noise, Precision Op Amp Data Sheet8/2/20161M
Features and Benefits
- Ultralow Voltage Noise
- 30nVP-P Noise: 0.1Hz to 10Hz
- 1.2nV/√Hz Typical at 1kHz
- Maximum Offset Voltage: 50μV
- Maximum Offset Voltage Drift: 0.5μV/°C
- CMRR: 124dB (Minimum)
- AVOL: 132dB (Minimum)
- Slew Rate: 30V/μs
- Gain-Bandwidth Product: 15MHz
- Wide Supply Range: 8V to 33V
- Ultralow THD: –115dB at 1kHz
- Unity Gain Stable
- Low Power Shutdown: 6.2µA
- SOIC-8E and 4mm × 3mm 12-Lead DFN Packages
- 4.5kV HBM and 2kV CDM Tolerant
The LT6018 is a 33V precision operational amplifier with excellent noise performance. With 0.1Hz to 10Hz noise of only 30nVP-P, the LT6018 is an outstanding choice for applications where 1/f noise impacts system performance. The LT6018 has excellent DC performance with a maximum offset voltage of 50μV and a maximum offset voltage drift of 0.5μV/°C. The input offset voltage remains low over the entire common mode input range, providing a minimum CMRR of 124dB. Open loop gain is typically 142dB enabling the part to achieve linearity better than 1ppm. The proprietary circuit topology of the LT6018 provides excellent slew rate and settling time without compromising noise or DC precision.
An enable pin allows the LT6018 to be put in a low power shutdown mode, reducing the typical supply current to only 6.2μA. A reference pin for the enable pin is also provided, which simplifies the interface between external circuitry and the LT6018.
The LT6018 is available in 8-lead SO and 12-lead 4mm × 3mm DFN packages, both of which include an exposed pad to reduce thermal resistance. The LT6018 is specified over the –40°C to 85°C and –40°C to 125°C temperature ranges.
- ADC Driver Applications
- Low Noise Precision Signal Processing
- Multiplexed Applications
- DAC Buffer
- Precision Data Acquisition
- Active Filters
- Professional Audio
Markets and Technologies
Product Lifecycle Recommended for New Designs
This product has been released to the market. The data sheet contains all final specifications and operating conditions. For new designs, ADI recommends utilization of these products.
Documentation & Resources
DN1039 - Low Noise, Precision Op Amp Drives High Resolution SAR ADCs8/23/2016257K
Can You Really Get ppm Accuracies from Op Amps?7/17/2019 Analog Dialogue
When Good Electrons Go Bad: How to Protect Your Analog Front End1/1/2019
Low Noise, Precision Op Amp Drives High Resolution SAR ADCs11/20/2017
Tools & Simulations
LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.
To launch ready-to-run LTspice demonstration circuits for this part:
Step 1: Download and install LTspice on your computer.
Step 2: Click on the link in the section below to download a demonstration circuit.
Step 3: If LTspice does not automatically open after clicking the link below, you can instead run the simulation by right clicking on the link and selecting “Save Target As.” After saving the file to your computer, start LTspice and open the demonstration circuit by selecting ‘Open’ from the ‘File’ menu.
Models for the following parts are available in LTspice:
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal.View our quality and reliability program and certifications for more information.
|Part Number||Material Declaration||Reliability Data||Pin/Package Drawing||CAD Symbols, Footprints & 3D Models|
|LT6018HDE#PBF||Material Declaration||Reliability Data||12(10)-Lead DFN (4mm x 3mm w/ EP)|
|LT6018HDE#TRPBF||Material Declaration||Reliability Data||12(10)-Lead DFN (4mm x 3mm w/ EP)|
|LT6018HS8E#PBF||Material Declaration||Reliability Data||8-Lead SOIC (Narrow 0.15 Inch w/ EP)|
|LT6018HS8E#TRPBF||Material Declaration||Reliability Data||8-Lead SOIC (Narrow 0.15 Inch w/ EP)|
|LT6018IDE#PBF||Material Declaration||Reliability Data||12(10)-Lead DFN (4mm x 3mm w/ EP)|
|LT6018IDE#TRPBF||Material Declaration||Reliability Data||12(10)-Lead DFN (4mm x 3mm w/ EP)|
|LT6018IS8E#PBF||Material Declaration||Reliability Data||8-Lead SOIC (Narrow 0.15 Inch w/ EP)|
|LT6018IS8E#TRPBF||Material Declaration||Reliability Data||8-Lead SOIC (Narrow 0.15 Inch w/ EP)|
|Wafer Fabrication Data|
Support & Discussions
Sample & Buy
See our Ordering FAQs for answers to questions about online orders, payment options and more.
Buy Now Pricing
(**) Displayed Buy Now Price and Price Range is based on small quantity orders.
(*)The 1Ku list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
Please see the latest communication from our CCO regarding lead times.
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.