DS3154

Single/Dual/Triple/Quad DS3/E3/STS-1 LIUs

Industry's Smallest Multichannel DS3/E3 and STS-1 LIUs

Top

Product Lifecycle Obsolete

The models in this product family are no longer available.

Replacement Parts

To find replacement products for this part:

Rochester Electronics and Arrow Supply Assurance have partnered with Analog Devices to source products that have been previously discontinued or have become obsolete.

Evaluation Kits (1)

DS3153DK

Triple DS3/E3/STS-1 LIU Demo Kit

DS3153DK

View Detailed Evaluation Kit Information

The DS3153DK is an easy-to-use evaluation kit for the DS3153 triple DS3/E3/STS-1 LIU. A surface-mounted DS3153 and careful layout of the analog signal traces provide maximum signal integrity to demonstrate the transmit and receive capabilities of the DS3153. On-board Dallas 8051-compatible microcontroller and included software give point-and-click access to configuration and status registers from a personal computer. LEDs on the board indicate interrupt, loss-of-signal, transmit driver monitor, and PRBS sync status for all four ports. The board provides BNC connectors for the line-side transmit and receive differential pairs and a 50-pin connector for framer interface signals. All LEDs and connectors are clearly labeled with silk-screening to identify associated signals.

Features & Benefits

Soldered DS3153 for Best Signal Integrity
BNC Connectors, Transformers and Termination Passives for All Four LIUs
Careful Layout for Analog Signal Paths
Equipment-Side Connector for External Data Source/Sink or External Remote Loopback
On-Board DS3 and E3 Crystal Oscillators
DS3153 Configured for CPU Bus Operation for Complete Control Over the Device
On-Board Dallas Microcontroller and Included Software Provide Point-and-Click Access to the DS3153 Register Set
LEDs for Interrupt, Loss-of-Signal, Transmit Driver Monitor, and PRBS Sync
Banana Jack Connectors for VDD and GND Support Use of Lab Power Supplies
Separate DS3153 VDD to Enable IDD Measurements
Easy-to-Read Silk Screen Labels Identify the Signals Associated with All Connectors, Jumpers and LEDs

Documentation & Resources

Data Sheets

DS3151-DS3154: Single/Dual/Triple/Quad DS3/E3/STS-1 LIUs Data Sheet (Rev. 4)
3/9/2007

PDF

689K

Reliability Data

DS3154 Reliability Data
1/12/2023

PDF

22K

Application Notes

Guidelines for Laying Out T3 and E3 Network Interfaces
12/22/2004
Connecting the Agere Supermapper™ Device Family to Dallas T3 LIUs
6/16/2004

Design Notes

Configuring Maxim LIUs Without a Microcontroller
6/15/2005
Interfacing the DS3144 Framer with the DS3154 Line Interface Unit (LIU)
3/9/2004
T3/E3/STS-1 LIU Secondary Surge Protection Design
3/6/2003

Technical Articles

Measuring Return Loss Using the Advantest R3132 Spectrum Analyzer
12/14/2005
Measuring Return Loss on T3/E3/STS-1 LIUs
6/20/2005
Connecting the Agere Ultramapper Device Family to Maxim T3/E3 LIUs
3/24/2004
HFTA-09.0: T3/E3/STS-1 Fiber Optic Extension
1/5/2004
Modifying the pulse shape of DS315x using Test Registers
12/4/2003
Redundancy Protection for T3/E3/STS-1 Networks\r\n
9/16/2003
Modifying the E3 Template Compliance of the DS3150, DS315x and DS325x
6/3/2003
Pulse Template Measurement
12/10/2002
Measuring Telecom Systems Against a Pulse Mask Template
12/3/2002
T1/E1 and T3/E3 Transformer Selection Guide
10/15/2001

Tools & Simulations

IBIS Models

IBS

125.33K

DS3154 IBIS Model

BSDL Model Files

TXT

21.80K

ADSP-DS3154 B BSDL Model

TXT

20.83K

ADSP-DS3154 A BSDL Model

TXT

21.06K

ADSP-DS3154 B1 BSDL Model

Design Resources

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal.