LT1490

PRODUCTION

Dual and Quad Micropower Rail-to-Rail Input and Output Op Amps

Product Selection Table
Viewing:

Overview

  • Rail-to-Rail Input and Output
  • Single Supply Input Range: −0.4V to 44V
  • Micropower: 50µA/Amplifier Max
  • MSOP Package
  • Specified on 3V, 5V and ±15V Supplies
  • High Output Current: 20mA
  • Output Drives 10,000pF with Output Compensation
  • Reverse Battery Protection to 18V
  • No Supply Sequencing Problems
  • High Voltage Gain: 1500V/mV
  • High CMRR: 98dB
  • No Phase Reversal
  • Gain Bandwidth Product: 200kHz

The dual LT1490 and quad LT1491 op amps operate on all single and split supplies with a total voltage of 2V to 44V drawing only 40µA of quiescent current per amplifier. These amplifiers are reverse supply protected; they draw no current for reverse supply up to 18V. The input range of the LT1490/LT1491 includes both supplies and the output swings to both supplies. Unlike most micropower op amps, the LT1490/LT1491 can drive heavy loads; their rail-to-rail outputs drive 20mA. The LT1490/LT1491 are unity-gain stable and drive all capacitive loads up to 10,000pF when optional 0.22µF and 150Ω compensation is used.

The LT1490/LT1491 have a unique input stage that operates and remains high impedance when above the positive supply. The inputs take 44V both differential and common mode even when operating on a 3V supply. Built-in resistors protect the inputs for faults below the negative supply up to 22V. There is no phase reversal of the output for inputs 22V below V– or 44V above V–, independent of V+.

The LT1490 dual op amp is available in the 8-pin MSOP, SO and PDIP packages. The quad LT1491 is available in the 14-pin SO and PDIP packages.

For new designs it is recommended that the LT1490A/LT1491A be used instead of the LT1490/LT1491. See the LT1490A/LT1491A data sheet for details.

Applications

  • Battery- or Solar-Powered Systems
    • Portable Instrumentation
    • Sensor Conditioning
  • Supply Current Sensing
  • Battery Monitoring
  • Micropower Active Filters
  • 4mA to 20mA Transmitters
LT1490
Dual and Quad Micropower Rail-to-Rail Input and Output Op Amps
Battery Monitor Product Package 1 Product Package 2
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Reliability Data 1

Application Note 1

Technical Articles 4

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Hardware Ecosystem

Parts Product Life Cycle Description
Matched Resistors & Transistors 1
LT5400
RECOMMENDED FOR NEW DESIGNS Quad Matched Resistor Network
Operational Amplifiers (Op Amps) 1
LT1636
PRODUCTION Over-The-Top Micropower Rail-to-Rail Input and Output Op Amp
Modal heading
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project

Tools & Simulations

LTspice

Models for the following parts are available in LTspice:

  • LT1490
  • LT1490A
LTspice

LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.

Latest Discussions

2 Years Ago
LT1490 / LT1490A
View related discussion on EngineerZone®

Recently Viewed