LT1506

PRODUCTION

4.5A, 500kHz Step-Down Switching Regulator

Viewing:

Overview

  • Constant 500kHz Switching Frequency
  • Easily Synchronizable
  • Operates with Input as Low as 4V
  • Uses All Surface Mount Components
  • Inductor Size Reduced to 1.8µH
  • Saturating Switch Design: 0.07Ω
  • Shutdown Current: 20µA
  • Cycle-by-Cycle Current Limiting

The LT1506 is a 500kHz monolithic buck mode switching regulator functionally identical to the LT1374 but optimized for lower input voltage applications. It will operate over a 4V to 15V input range compared with 5.5V to 25V for the LT1374. A 4.5A switch is included on the die along with all the necessary oscillator, control and logic circuitry. High switching frequency allows a considerable reduction in the size of external components. The topology is current mode for fast transient response and good loop stability. Both fixed output voltage and adjustable parts are available.

A special high speed bipolar process and new design techniques achieve high efficiency at high switching frequency. Efficiency is maintained over a wide output current range by keeping quiescent supply current to 4mA and by utilizing a supply boost capacitor to saturate the power switch.

The LT1506 fits into standard 7-pin DD and fused lead SO-8 packages. Full cycle-by-cycle short-circuit protection and thermal shutdown are provided. Standard surface mount external parts are used, including the inductor and capacitors. There is the optional function of shutdown or synchronization. A shutdown signal reduces supply current to 20µA. Synchronization allows an external logic level signal to increase the internal oscillator from 580kHz to 1MHz.

Applications

  • Portable Computers
  • Battery-Powered Systems
  • Battery Charger
  • Distributed Power

LT1506
4.5A, 500kHz Step-Down Switching Regulator
5V to 3.3V Down Converter Efficiency vs Load Curren Product Package 1 Product Package 2
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet

This is the most up-to-date revision of the Data Sheet.

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Tools & Simulations

LTspice


Models for the following parts are available in LTspice:

  • LT1506
  • LT1506-3.3
LTspice

LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.


Evaluation Kits

eval board
DC237A

LT1506CS8 | 4.5A Switch, 500KHz Step Down Switching Regulator, 4V to 15VIN, 3.3VOUT @ 4A

Product Details

DC237A: Demo Board for the LT1506 4.5A, 500kHz Step-Down Switching Regulator.

eval board
DC238A

LT1506CR | 4.5A Switch, 500KHz Step Down Switching Regulator, 4V to 15VIN, 3.3VOUT @ 4A

Product Details

DC238A: Demo Board for the LT1506 4.5A, 500kHz Step-Down Switching Regulator.

DC237A
LT1506CS8 | 4.5A Switch, 500KHz Step Down Switching Regulator, 4V to 15VIN, 3.3VOUT @ 4A
DC237A - Schematic
DC238A
LT1506CR | 4.5A Switch, 500KHz Step Down Switching Regulator, 4V to 15VIN, 3.3VOUT @ 4A
DC238A - Schematic

Latest Discussions

No discussions on LT1506 yet. Have something to say?

Start a Discussion on EngineerZone®

Recently Viewed