EVAL-AD2428WC1BZ

Bus-powered A2B® slave node (no I2S/TDM, 4 PDM mics)

Top
User Guides Rev. 1.1
JP 2 View All
Design & Integration Files
1 View All

Overview

Features and Benefits

  • AD2428W Automotive Audio Bus A2B® Transceiver
    • A2B slave operation
    • Powered over A2B bus
  • Four PDM microphone inputs (INMP621)
  • GPIO LED

Please contact your local ADI sales office or authorized ADI product distributor to receive additional product information and technical support.

Product Details

An Automotive Audio Bus (A2B®) system consists of a single master and at least one slave, where the transceiver at the host controller is the master. The master transceiver generates clock, synchronization, and framing for all slave nodes and is programmable over a control bus (I2C) for configuration and readback. An extension of this control bus is embedded in the A2B data stream, which enables the host to directly access slave transceiver registers and any I2C-connected peripherals on slave nodes. Transceivers can connect directly to PDM microphones and to numerous peripherals via I2C and a multichannel I2S/TDM interface. Finally, the transceiver also supports an A2B bus powering feature, where the master node supplies voltage and current to the slave nodes over the same daisy-chained, twisted pair wire cable as used for the communication link, thus eliminating the need for a power supply on bus-powered slave nodes. Due to the numerous configurations that are possible for a given A2B system, there are several evaluation platforms that can be used in combination to verify system operation, as summarized in the table below.

Product Comparison Guide
A2B Evaluation Board Master/Slave Power
Supply		 I2S/TDM PDM Mics
EVAL-AD2428WD1BZ Master/Slave Local Yes 3
EVAL-AD2428WB1BZ Slave Bus Yes 2
EVAL-AD2428WC1BZ Slave Bus No 4
EVAL-AD2428WG1BZ Slave Local Yes 0
 ADZS-AD2428MINI  Master/Slave Local/Bus  Yes   0

Please contact your local ADI sales office or authorized ADI product distributor to receive additional product information and technical support.


Markets and Technologies

Applicable Parts

Package Contents

  • EVAL-AD2428WC1BZ board
  • 1.8m twisted-pair CAT5e-rated cable with DuraClik™ connectors

Documentation

Software

Software Development Tools

A2B network design tool and embedded software stack that allows audio network designers to graphically design an A2B network and deploy it into an embedded platform.
Graphical development tool for programming, development, and tuning software for ADI DSP audio processors and A2B® transceivers.

Buy

Buy functionality exists in desktop site
Back
Add to cart
Check Inventory
Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.