MAX77963
RECOMMENDED FOR NEW DESIGNS23VIN 3.2AOUT Buck-Boost Charger for 2S/3S Li-Ion Batteries and USB Power Delivery
- Part Models
- 1
- 1ku List Price
- price unavailable
Overview
- 3.5V to 23V Input Operating Range, 30VDC Withstand Voltage
- 96% Peak Efficiency for 2S Battery at 9VIN/8.4VOUT/1.5AOUT
- 96% Peak Efficiency for 3S Battery at 15VIN/12.6VOUT/2AOUT
- Reverse Leakage Protection
- 50mA to 3.15A Programmable Input Current Limit
- 50mA to 3.2A Programmable Constant Current Charge
- 12-Bit ADC for Monitoring Voltage, Current, and Temperature
- Remote Differential Voltage Sensing
- 600kHz, 1.2MHz, or 1.8MHz Switching Frequency Options
- Spread-Spectrum Modulation to Reduce EMI Emissions at the Switching Frequency
- System Instant-On with Smart Power Selector Power-Path
- Charge Safety Timer
- Die Temperature Regulation with Thermal Foldback Loop
- Input Power Management with Adaptive Input Current Limit (AICL) and Input Voltage Regulation
- PFM Operation to Guarantee No Audible Noise
- Integrated 10mΩ CHGIN to BYP Switch for Current Sense
- Integrated 10mΩ BATT to SYS Switch, up to 10A Overcurrent Threshold
- Reverse Buck Mode 5.1V/3A to Support USB OTG
- JEITA Compliant with NTC Thermistor Monitor
- I2C or Resistor Programmable
- 3.718mm x 3.718mm 49-Bump Wafer-Level Package (WLP)
The MAX77963 is a high-performance wide-input 3.2A buck-boost charger with a Smart Power Selector™ and operates as a reverse buck without an additional inductor, allowing the IC to power USB On-the-Go (OTG) accessories. The device integrates low-loss power switches and provides a small solution size, high efficiency, low heat, and fast battery charging. The reverse buck has a true-load disconnect and is protected by an adjustable output current limit. The device is highly flexible and programmable through I2C configuration or autonomously through resistor configuration.
The battery charger includes a Smart Power Selector to accommodate a wide range of battery sizes and system loads. The Smart Power Selector allows the system to start up gracefully when an input source is available even when the battery is deeply discharged (dead battery) or missing. For battery safety/authentication reasons, the IC can be configured to keep charging disabled and allow the DC-DC to switch and regulate the SYS voltage. The system processor can later enable charging using I2C commands as appropriate. Alternatively, the MAX77963 can be configured to automatically start charging.
APPLICATIONS
- Wide-Input Voltage Range for USB Power Delivery Applications
- 2- and 3-Cell Battery Powered Devices
- Smartphones, Tablets, and 2-in-1 Laptops
- Medical Devices, Health and Fitness Monitors
- Digital Still, Video, and Action Cameras
- Handheld Computers and Terminals
- Handheld Radios
- Power Tools
- Drones
- Battery Backups
- Wireless Speakers
Documentation
Data Sheet 1
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal. View our quality and reliability program and certifications for more information.
| Part Model | Pin/Package Drawing | Documentation | CAD Symbols, Footprints, and 3D Models |
|---|---|---|---|
| MAX77963EWJ+ | WLCSP |
This is the most up-to-date revision of the Data Sheet.
Software Resources
Can't find the software or driver you need?
Request a Driver/SoftwareTools & Simulations
Evaluation Kits
Evaluation Kit for MAX77963
Resources
Evaluation Kit for MAX77963
Resources
Latest Discussions
No discussions on MAX77963 yet. Have something to say?
Start a Discussion on EngineerZone®