概览

优势和特点

  • System-on-Module (SoM) Three-Connection Interface
  • Analog Devices ADAU1979 – Quad Analog-to-Digital Converter
  • Analog Devices ADAU1962A – 12 Channel, High Performance, 192kHz, 24-bit DAC
  • CAN FD 2× ADM3056E
  • Macronix MX66LM1G45G 1 Gbit OSPI Flash Memory
  • Gigabit Ethernet TI DP83867
  • 10/100 Ethernet TI DP83848
  • USB 2.0 PHY Microchip USB3340
  • USB 2.0 to QSPI FTDI
  • MicroSD Card Socket
  • 2× A2B Interface Connectors
  • Debug Interface (JTAG), On-Board ICE-1000 Emulator
  • Requires compatible System-on-Module board (e.g., EV-21569-SOM)

产品详情

The EV-SOMCRR EZ-KIT® carrier board enables users to plug-n-play with any of ADI’s System-on-Module (SoM) boards (e.g., EV-21569-SOM). The EV-SOMCRR EZ-KIT allows users to evaluate the most common peripherals and interfaces featured on ADI’s SHARC+ audio processors (e.g., Audio, Ethernet, MLB, USB, CAN, etc.). The EV-SOMCRR EZ-KIT contains an on-board ICE emulator to provide additional cost savings by eliminating the need for an external emulator. It also provides a connection to external A2B boards to allow for easy application expandability of customers’ systems.

The EV-SOMCRR EZ-KIT board must be used in conjunction with a SOM module board, as the processor itself is resident on the SOM board. In combination, the connected system utilizes the CrossCore® Embedded Studio (CCES) development tools to enable developers to achieve faster time to market. The development environment aids advanced application code development and debug, such as:

  • Create, compile, assemble, and link application programs written in C++, C, and assembly
  • Load, run, step, halt, and set breakpoints in application programs
  • Read and write data and program memory
  • Read and write core and peripheral registers

 

系统需求

Verify that your PC has these minimum requirements for the CCES installation:

  • 2 GHz single core processor; 3.3GHz dual core or better recommended
  • 4 GB RAM; 8GB or more recommended
  • 2 GB available disk space
  • One open USB port

Note: Please see the CrossCore® Embedded Studio Release Notes for the latest information about System Requirements.

软件

产品下载

EV-21569-EZKIT Board Support Package – Current Release (Rev. 1.0.0)

Software Development Tools

Future releases of CrossCore Serial Flash Programmer will be distributed as part of the CrossCore Utilities product. CrossCore Utilities provides several utilities for use with Cortex-M processors. These utilities have previously been distributed within various Board Support Packages for the IAR and Keil toolchains, and are collected together in this product for convenient maintenance.

CrossCore Embedded Studio是针对Blackfin和SHARC处理器系列的世界一流集成开发环境(IDE)。

Middleware

FreeRTOS for Analog Devices Processors is a Real Time Operating System for Analog Devices Processors.
Lightweight TCP/IP (lwIP) Stack for CrossCore Embedded Studio针对嵌入式平台实现了广泛接受的TCP/IP堆栈,支持TCP/IP套件中的绝大多数网络协议。

HCC Embedded’s USB stacks are mature, widely-used stacks that can support almost any desired USB configuration.

HCC Embedded’s TCP/IP stack provides all main protocols and supports both IPv4 and IPv6

HCC Embedded’s FAT file system is full-featured and optimized for use in embedded applications that need to attach FAT 12/16/32-compliant media to a product.

用于ADSP-SC5xx处理器系列的Linux内核和开发工具

硬件 (1)

EZ-Kits

在线购买

电脑端提供购买功能
所示报价为单片价格。所列的美国报价单仅供预算参考,指美元报价(每片美国离岸价),如有修改恕不另行通知。由于地区关税、商业税、汇率及手续费原因,国际报价可能不同。