ADMP510

Obsolete

RF-Hardened Ultralow Noise Microphone with Bottom Port and Analog Output

Data Sheet (Rev. A) Product Selection Table
Viewing:

Overview

  • Tiny, 3.35 mm × 2.50 mm × 0.98 mm surface-mount package
  • Non-inverted signal output
  • Omnidirectional response
  • High SNR of 65 dBA
  • Sensitivity of −38 dBV
  • Sensitivity tolerance of ±2 dB
  • Extended frequency response from 60 Hz to 20 kHz
  • Enhanced RF Performance
  • 124 dB SPL acoustic overload point
  • Low current consumption: 180 µA
  • Single-ended analog output
  • High PSR of −78 dBV
  • Compatible with Sn/Pb and Pb-free solder processes
  • RoHS/WEEE compliant

Analog Devices has sold its MEMS Microphone product line to InvenSense.
Please visit the InvenSense ADMP510 product page for all technical support and sales information.

The ADMP510 is an RF-hardened, high performance, very low noise, low power, analog output, bottom-ported omnidirectional MEMS microphone. The ADMP510 consists of a MEMS microphone element, an impedance converter and an output amplifier. The ADMP510 sensitivity specification makes it an excellent choice for both near field and far field applications. The ADMP510 is pin-compatible with the ADMP504 microphone.

The ADMP510 has very high SNR and extended wideband frequency response, resulting in natural sound with high intelligibility. Low current consumption enables long battery life for portable applications.

The ADMP510 is available in an ultraminiature 3.35 mm × 2.5 mm × 0.98 mm surface-mount package.

Applications

  • Smartphones and feature phones
  • Tablet computers
  • Teleconferencing systems
  • Digital still and video cameras
  • Bluetooth headsets
  • Notebook PCs
  • Security and surveillance
ADMP510
RF-Hardened Ultralow Noise Microphone with Bottom Port and Analog Output
ADMP510-fbl ADMP510-pc
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Obsolete Data Sheet 1

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Evaluation Kits

eval board
schematic 1
EVAL-ADMP510

ADMP510 Flex Eval Board

Buy Now View Details

Product Details

Analog Devices has sold its MEMS Microphone product line to InvenSense.
Please visit the InvenSense ADMP510 product page for all technical support and sales information.

This flex PCB includes just the ADMP510 and a bypass capacitor. The three wires allow an easy connection to the microphone’s analog output signal, VDD, and ground into your evaluation system.

EVAL-ADMP510
ADMP510 Flex Eval Board

Latest Discussions

No discussions on ADMP510 yet. Have something to say?

Start a Discussion on EngineerZone®

Recently Viewed