The ADIS16135 iSensor® is a high performance, digital scope sensing system that operates autonomously and requires no user configuration to produce accurate rate sensing data. It provides performance advantages with low noise density, wide bandwidth, and excellent in-run bias stability, which are enabling for applications such as platform control, navigation, robotics, and medical instrumentation.
This sensor system combines industry-leading iMEMS® technology with signal conditioning that optimizes dynamic performance. The factory calibration characterizes the entire sensor signal chain for sensitivity and bias over a temperature range of −40°C to +85°C. As a result, each ADIS16135 has its own unique correction formulas to produce accurate measurements upon installation. For some systems, the factory calibration eliminates the need for system-level calibration and greatly simplifies it for others.
The ADIS16135 samples data at rates of up to 2048 SPS and offers an averaging/decimation filter structure for optimizing noise/bandwidth trade-offs. The serial peripheral interface (SPI) and user register structure provide easy access to configuration controls and calibrated sensor data for embedded processor platforms.
The 36 mm × 44 mm × 14 package provides four holes for simple mechanical attachment, using M2 (or 2-56 standard size) machine screws along with a standard 24-pin, dual-row, 1 mm pitch connector that supports electrical attachment to a printed circuit board or cable system. The ADIS16135 provides an operating temperature range of −40°C to +105°C.
|ADIS16135: ±300°/Sec Precision Angular Rate Sensor Data Sheet (Rev D, 02/2013) (pdf, 422 kB)||产品数据手册|
|UG-363: ADISUSB User Guide (pdf, 671 kB)||用户指导|
|ADIS16136 IIO Inertial Measurement Unit Linux Driver||设备驱动||HTML|
PC-USB Evaluation for iSensor products
High-performance, PC-USB Evaluation System for iSensor products
This board includes the ADIS16135BMLZ and interface connectors that simplify prototype connection with an embedded processor or remote connection to the ADISUSB Evaluation system. It is not required for ADIS16135BMLZ evaluation on the ADISUSB system.
原理图符号和PCB封装— Analog Devices offers Symbols & Footprints which are compatible with a large set of today’s CAD systems for broader and easier support.