HMC835

LAST TIME BUY

Wideband PLL+VCO, 33 - 4100 MHz, 4 Outputs

Viewing:

Overview

  • Wideband: 33 - 4100 MHz
  • Maximum Phase Detector Rate 100 MHz
  • PLL FOM: -230 dBc/Hz Integer Mode, -227 dBc/Hz Fractional Mode
  • < 160 fs Integrated RMS Jitter (1 kHz to 100 MHz)
  • Figure of Merit (FOM) -226 dBc/Hz
  • Low Noise Floor: -165 dBc/Hz
  • 2 Differential RF or 4 Single Ended Outputs
  • External LO Input:
  • See datasheet for additional features

The HMC835LP6GE is a low noise, wide band, Fractional-N PLL that features an integrated VCO with a fundamental frequency of 2020 to 4100 MHz, and an integrated VCO Output Divider (divide by 2/4/6/.../60/62) that together enable the HMC835LP6GE to generate frequencies from 33 MHz to 4100 MHz. Integrated Phase Detector (PD) and a deltasigma modulator capable of operating at up to 100 MHz enable wider loop-bandwidths, faster frequency changes along with excellent spectral performance.

Two independent RF outputs, with independent gain control, enable the HMC835LP6GE to distribute identical frequency and phase signals to multiple destinations, at optimal signal levels tailored to each output.

External VCO input, allows the HMC835LP6GE to lock external VCOs, and enables cascaded LO architectures for MIMO radio applications. Two separate Charge Pump (CP) outputs enable separate loop filters optimized for both integrated and external VCOs, and seamless switching between integrated or external VCOs during operation. Programmable RF output phase feature can further phase adjust and synchronize multiple HMC835LP6GEs enabling scalable MIMO and beam-forming radio architectures.

Additional features include configurable output mute function that mutes RF outputs during frequency changes, Exact Frequency Mode that enables the HMC835LP6GE to generate fractional frequencies with 0 Hz frequency error, and the ability to synchronously change frequencies without changing the phase of the output signal.

APPLICATIONS

  • MIMO Radio Architectures
  • Cellular Infrastructure
  • Cellular backhaul
  • Communications Test Equipment
  • CATV Equipment
  • Phased Array Applications 
  • DDS Replacement

HMC835
Wideband PLL+VCO, 33 - 4100 MHz, 4 Outputs
pdp-image-unavailable
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Hardware Ecosystem

Parts Product Life Cycle Description
Comparators 1
LTC6957 Low Phase Noise, Dual Output Buffer/Driver/Logic Converter
Phase-Locked Loop (PLL) Synthesizers 1
HMC1031 LAST TIME BUY 0.1 MHz to 500 MHz Clock Generator with Integer N PLL
Modal heading
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project

Tools & Simulations

ADIsimPLL™

ADIsimPLL enables the rapid and reliable evaluation of new high performance PLL products from ADI. It is the most comprehensive PLL Synthesizer design and simulation tool available today. Simulations performed include all key non-linear effects that are significant in affecting PLL performance. ADIsimPLL removes at least one iteration from the design process, thereby speeding the design- to-market.

Open Tool

Evaluation Kits

eval board
EVAL-HMC835LP6G

HMC835LP6G Evaluation Board

Product Details

This page contains ordering information for evaluating the HMC835LP6G.

The design files link includes the BOM, schematics, and Gerber files for the evaluation board.

EVAL-HMC835LP6G
HMC835LP6G Evaluation Board
HMC835 Evaluation Board - Angle View HMC835 Evaluation Board - Top View HMC835 Evaluation Board - Bottom View

Latest Discussions

Recently Viewed