To Top
Add to Signal Chain Designer

ADP5065:  Fast Charge Battery Management with Power Path and USB Compatibility

Product Status:Recommended for New Designs
Data
Sheet
ADP5065 Data Sheet Rev D, 02/2013 (pdf 1707kB)

Product Details

Product Status:Recommended for New Designs
Check Price and Availability Add to Signal Chain Designer Explore in Signal Chain Designer

The ADP5065 charger is fully compliant with the USB 2.0, USB 3.0, and USB Battery Charging Specification 1.1 and enables charging via the mini USB VBUS pin from a wall charger, car charger, or USB host port.

The ADP5065 operates from a 4 V to 5.5 V input voltage range but is tolerant of voltages of up to 20 V. This alleviates the concerns about the USB bus spiking during disconnect or connect scenarios.

The ADP5065 also features an internal FET between the dc-to-dc charger output and the battery. This permits battery isolation and, hence, system powering under a dead battery or no battery scenario, which allows for immediate system function on connection to a USB power supply.

Based on the type of USB source, which is detected by an external USB detection chip, the ADP5065 can be set to apply the correct current limit for optimal charging and USB compliance.

The ADP5065 comes in a very small and low profile 20-lead WLCSP (0.5 mm pitch spacing) package.

The overall solution requires only five small, low profile external components consisting of four ceramic capacitors (one of which is the battery filter capacitor), one multilayer inductor. In addition to these components, there is one optional dead battery situation default setting resistor. This configuration enables a very small PCB area to provide an integrated and performance enhancing solution to USB battery charging and power rail provision.

APPLICATIONS

  • Digital still cameras
  • Digital video cameras
  • Single cell Li-Ion portable equipment
  • PDA, audio, GPS devices
  • Mobile phones

myAnalogmyAnalog
Product Updates: Notify Me

FEATURES and BENEFITS

  • 3 MHz switch mode charger
  • 1.25 A charge current from dedicated charger
  • Up to 680 mA charging current from 500 mA USB Host
  • Operating input voltage from
    4.0 V up to 5.5V
  • Tolerant input voltage −0.5 V to +20 V (USB VBUS)
  • Dead battery isolation FET between battery and charger output
  • Battery thermistor input with automatic charger shutdown for when battery temperature exceeds limits
  • Compliant with the JEITA Li-Ion battery charging temperature specification
  • SYS_EN_OK flag to hold off system turn-on until battery is at minimum required level for guaranteed system startup due to minimum battery voltage and/or minimum battery charge level requirements
  • EOC programming with C/20, C/10 and specific current level selection

Functional Block Diagram for ADP5065

ADP5065 Diagram
Typical Applications and Other Diagrams

Similar Products

Find Similar Products
By Operating Parameters

Documentation

Title Content Type File Type
ADP5065: Fast Charge Battery Manager with Power Path and USB Compatibility Data Sheet (Rev D, 02/2013) (pdf, 1707 kB) Data Sheets PDF
UG-415: ADP5065 Evaluation Board Manual  (pdf, 1680 kB) User Guides PDF
RAQs index Rarely Asked Questions HTML
Glossary of EE Terms Glossary HTML

Evaluation Kits & Symbols & Footprints

Evaluation Boards & KitsView the Evaluation Boards and Kits page for documentation and purchasing

Symbols and Footprints— Analog Devices offers Symbols & Footprints which are compatible with a large set of today’s CAD systems for broader and easier support.

SampleSample & Buy

Price, packaging, availability

Price Table Help

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

ADP5065 Evaluation Board
Model Description Price RoHS View PCN/ PDN Check Inventory/
Purchase/Sample
ADP5065CB-EVALZ Status: Production Evaluation Board $60.00 Yes -
USB-SDP-CABLEZ Status: Production Evaluation Board $89.00 Yes -

Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.

Check Inventory & Purchase

View Sales and Distribution Offices
Review this Product X
content here.
content here.

Review this Product

Close