The AD7280A contains all the functions required for general-purpose monitoring of stacked lithium ion batteries as used in hybrid electric vehicles, battery backup applications, and power tools. The part has multiplexed cell voltage and auxiliary ADC measurement channels for up to six cells of battery management. An internal ±3 ppm reference is provided that allows a cell voltage accuracy of ±1.6 mV. The ADC resolution is 12 bits and allows conversion of up to 48 cells within 7 μs.
The AD7280A operates from just one VDD supply that has a range of 8 V to 30 V (with an absolute maximum rating of 33 V). The part provides six differential analog input channels to accommodate large common-mode signals across the full VDD range. Each channel allows an input signal range, VIN(+) − VIN(−), of 1 V to 5 V. The input pins assume a series stack of six cells. In addition, the part includes six auxiliary ADC input channels that can be used for temperature measurement or system diagnostics.
The AD7280A includes on-chip registers that allow a sequence of channel measurements to be programmed to suit the applications requirements.
The AD7280A also includes a dynamic alert function that can detect if the cell voltages or auxiliary ADC inputs exceed an upper or lower limit defined by the user. The AD7280A has cell balancing interface outputs designed to control external FET transistors to allow discharging of individual cells.
The AD7280A includes a built in self-test feature that internally applies a known voltage to the ADC inputs.
There is a daisy-chain interface that allows up to eight parts to be stacked without the need for individual device isolation.
The AD7280A requires only one supply pin that takes 6.5 mA under normal operation, while converting at 1 MSPS.
All this functionality is provided in a 48-lead LQFP package operating over a temperature range of −40°C to +105°C.
|Title||Content Type||File Type|
|AD7280A: Lithium Ion Battery Monitoring System Data Sheet (Rev 0, 04/2011) (pdf, 864 kB)||Data Sheets|
|CN0325: PLC/DCS Universal Analog Input Using Either 4 or 6 Pin Terminal Block (pdf, 2260 kB)||Circuit Note|
|CN-0235: Fully Isolated Lithium Ion Battery Monitoring and Protection System (pdf, 849 kB)||Circuit Note|
|CN-0197: Lithium Ion Battery Stack Monitor with Both Signal and Power Isolation (pdf, 406 kB)||Circuit Note|
|UG-252: Evaluation Board for the AD7280A Lithium Ion Battery Monitoring System (pdf, 1627 kB)||User Guides|
|Glossary of EE Terms||Glossary||HTML|
|Title||Content Type||File Type|
|BeMicro FPGA Project for CN0235 with Nios driver||FPGA HDL||HTML|
|CN0235 FMC-SDP Interposer & Evaluation Board / Xilinx KC705 Reference Design||FPGA HDL||HTML|
|AD7280A IIO Lithium Ion Battery Monitoring System Linux Driver (Wiki Site)||Device Drivers||HTML|
Recommended Battery Safety Monitor for the AD7280A
Were these recommendations helpful?
The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.