Add to Signal Chain Designer

ADV212:  Wavescale® JPEG 2000 Video Codec

Product Details


The ADV212 is a single-chip JPEG2000 codec targeted for video and high bandwidth image compression applications that can benefit from the enhanced quality and features provided by the JPEG2000 (J2K) ISO/IEC15444-1 image compression standard. The part implements the computationally intensive operations of the JPEG2000 image compression standard and provides fully compliant code-stream generation for most applications.

The dedicated video port of the ADV212 provides glueless con-nection to common digital video standards such as ITU-R BT.656, SMPTE 125M, SMPTE 293M (525p), ITU-R BT.1358 (625p), SMPTE 274M (1080i), or SMPTE 296M (720p). A variety of other high speed, synchronous pixel and video formats can also be supported by using the programmable framing and validation signals.

The ADV212 is an upgrade version of the ADV202 that is identical in pinout and footprint. It supports all the functionality of the ADV202 and has the following additional options: JTAG/boundary scan support and power reduction of at least 30% compared with the ADV202.

Applications

  • Networked video and image distribution systems
  • Wireless video and image distribution
  • Image archival/retrieval
  • Digital CCTV and surveillance systems
  • Digital cinema systems
  • Professional video editing and recording
  • Digital still cameras
  • Digital camcorders

FEATURES and BENEFITS

  • Complete single-chip JPEG 2000 compression and decompression solution for video and still images
  • Identical in pinout and footprint to the ADV202 and supports all the functionality of the ADV202
  • Power reduction of at least 30% compared with ADV202
  • JTAG/boundary scan support
  • Patented SURF® (spatial ultraefficient recursive filtering) technology enables low power, low cost wavelet-based compression
  • Supports both 9/7 and 5/3 wavelet transforms with up to 6 levels of transform
  • See Data Sheet for Additional Information

Functional Block Diagram for ADV212

Advantiv

Documentation

Title Content Type File Type
ADV212: JPEG 2000 Video Codec Data Sheet (Rev A, 04/2008) (pdf, 389 kB) Data Sheets PDF
Implementing JPEG2000 compression
By David Dashefsky, Analog Devices, Inc. (DesignLine, 5/12/2006)
Technical Articles HTML
JPEG2000 Codec for Robust, Scalable Pro and Consumer Video
By Yuzo Shida, Analog Devices, Inc. (DesignLine, 10/13/2006)
Technical Articles HTML
ADV212 Technical Documentation Technical Documentation HTML
Hisense Selects Tzero and Analog Devices for HDTVs with Integrated Wireless Video
(Yahoo! Finance, 1/8/2007)
Product Reviews HTML
Security and Surveillance Applications Overview HTML
What is the ADV202/ADV212? FAQs/RAQs HTML
What is the difference between the ADV202 and the ADV212? FAQs/RAQs HTML
What is the compression rate of the ADV202/ADV212? FAQs/RAQs HTML
How do I determine the number of ADV2x2s required for a particular application? FAQs/RAQs HTML
Can I use the ADV202/212 if my input is not to standard NTSC, PAL, 720p/60, 1080i/60 video? FAQs/RAQs HTML
Can I input raw image data that comes from a high resolution still image source? FAQs/RAQs HTML
Is the VDATA bus the only interface to input/output video/pixel data? FAQs/RAQs HTML
Does the ADV202/212 tile the input if my input image is larger than the maximum specified? FAQs/RAQs HTML
How does the ADV202/212 handle VBI or CC data? FAQs/RAQs HTML
Is it possible to bypass the ADV202/ADV212 compression? FAQs/RAQs HTML
How do I determine the number of codeblocks per image? FAQs/RAQs HTML
I require a compression system with extreme low latency FAQs/RAQs HTML
Is the ADV202/212 output compatible with any JPEG2000 software codecs? FAQs/RAQs HTML
What are the recommended configuration and parameter settings for PAL? FAQs/RAQs HTML
What are the recommended configuration and parameter settings for NTSC? FAQs/RAQs HTML
How to input RGB data to the ADV202/212 FAQs/RAQs HTML
How to input video that is not ITU.R.BT656 FAQs/RAQs HTML
Why does 1080i/720p standard input require two ADV2x2s? FAQs/RAQs HTML
How to use the ADV202/212 with multiple-camera input FAQs/RAQs HTML
How to configure the ADV202/212 for 4Kx4K input images FAQs/RAQs HTML
Can I input RGB Bayer pattern directly to the ADV202/212? FAQs/RAQs HTML
The vertical blanking between fields/frames varies on my input source. What mode should I use? FAQs/RAQs HTML
How does the ADV202/212 synchronize to video input with HVF syncs? FAQs/RAQs HTML
What happens if the HVF inputs do not match dimension register settings? FAQs/RAQs HTML
What is the output format of the ADV202/212? FAQs/RAQs HTML
What information does the ADV202/212 header contain? FAQs/RAQs HTML
How do I know when the ADV202/212 has finished compressing a field/frame/image? FAQs/RAQs HTML
What is the HDATA impedance state? FAQs/RAQs HTML
How many ADV202/212s can I connect together on the HDATA bus in a multi-chip application? FAQs/RAQs HTML
How should I connect unused VDATA pins and HDATA pins? FAQs/RAQs HTML
Do Vclk and Mclk have to be synchronous? FAQs/RAQs HTML
How should the CFG pins be connected? FAQs/RAQs HTML
Are SCOMM4 and SCOMM5 required? FAQs/RAQs HTML
How can I save on pin count or what is the absolute minimum pin connection required to make the ADV202/212 work? FAQs/RAQs HTML
What is the host interface used for? FAQs/RAQs HTML
What is the highest transfer rate for data and control? FAQs/RAQs HTML
What is the difference between direct and indirect registers? FAQs/RAQs HTML
What is Fly-By DMA used for? FAQs/RAQs HTML
What is the difference between the DREQ/DACK and DCS DMA modes? FAQs/RAQs HTML
In DMA burst mode, what if the last burst does not contain the number of bursts specified as in the EDMOD register? FAQs/RAQs HTML
Must DMA always be used for compressed data input/output? FAQs/RAQs HTML
What does the PULS field in the EDMOD registers do? FAQs/RAQs HTML
How is the optimal DMA burst length determined? FAQs/RAQs HTML
What is the DMA mode with the highest data transfer rate? FAQs/RAQs HTML
What are the advantages of JDATA streaming mode? FAQs/RAQs HTML
Why are there two external DMA channels? FAQs/RAQs HTML
How to change the video input rate to the ADV202/212 FAQs/RAQs HTML
Is it possible to encode and decode different frame sizes without reloading the firmware? FAQs/RAQs HTML
How to change the compression ratio from field to field without reloading the firmware FAQs/RAQs HTML
How to program compression rate FAQs/RAQs HTML
How to use encode parameters RCtype and RCval FAQs/RAQs HTML
What does the J2KPROG encode parameter mean? FAQs/RAQs HTML
What parameters can I change on the fly? FAQs/RAQs HTML
What does encode parameter VFORMAT De-interlace mean? FAQs/RAQs HTML
What is visual weighting? FAQs/RAQs HTML
What are 9/7 and 5/3? How do I know which one to use? FAQs/RAQs HTML
What does 'positive' / 'negative' polarity mean for HVF and VCLK? FAQs/RAQs HTML
What are Multilayers? FAQs/RAQs HTML
How to determine latency? FAQs/RAQs HTML
How does the ADV202 recover from data input loss in encode or decode mode? FAQs/RAQs HTML
I have "video on demand". Can I put the ADV202/212 in a pause state in encode mode until video or an image is available again? FAQs/RAQs HTML
In encode mode, is it required to read out the previous field before the next field is input? FAQs/RAQs HTML
How to extract low resolution packets from one JPEG2000 stream FAQs/RAQs HTML
Are there any artifacts on tile boundaries after merging tiles? FAQs/RAQs HTML
Can I stop/start encoding without reloading the firmware? FAQs/RAQs HTML
What are precincts and does the ADV202/212 support precincts? FAQs/RAQs HTML
Can I use JDATA mode in a multi-chip application? FAQs/RAQs HTML
How to display ADV202/212 compressed files on PC screen FAQs/RAQs HTML
In encode mode, how do I know if the ADV202/212 is ready to output data? FAQs/RAQs HTML
What is a .sea file? FAQs/RAQs HTML
What evaluation systems are available for the ADV202/212? FAQs/RAQs HTML
How can JPEG2000 be used in home video distribution? FAQs/RAQs HTML
RAQs index Rarely Asked Questions HTML
Glossary of EE Terms Glossary HTML

Evaluation Kits & Symbols & Footprints

Evaluation Boards & KitsView the Evaluation Boards and Kits page for documentation and purchasing

Symbols and Footprints— Analog Devices offers Symbols & Footprints which are compatible with a large set of today’s CAD systems for broader and easier support.

SampleSample & Buy

Price, packaging, availability

ADV212 Model Options
Model Package Pins Temp.
Range
Packing,
Qty
Price*(100-499) Price*1000 pcs RoHS View PCN/ PDN Check Inventory/
Purchase/Sample
ADV212BBCZ-115 Status: Production 121 ball CSPBGA (12x12mm) 121 Comm. Tray, 189 $29.76 $25.30 Y  Material Info PCN Purchase Sample
ADV212BBCZ-150 Status: Production 144 ball CSPBGA (13x13mm) 144 Comm. Tray, 160 $35.71 $30.36 Y  Material Info PCN Purchase Sample
ADV212BBCZRL-115 Status: Production 121 ball CSPBGA (12x12mm) 121 Comm. Reel, 1500 - $25.30 Y  Material Info PCN Purchase
ADV212BBCZRL-150 Status: Production 144 ball CSPBGA (13x13mm) 144 Comm. Reel, 1000 - $30.36 Y  Material Info PCN Purchase
Price Table Help

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

ADV212 Evaluation Tools
Model Description Price RoHS View PCN/ PDN Check Inventory/
Purchase/Sample
ADV212-HD-EB Status: Production Evaluation Board $2,530.00 No -

Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.

Check Inventory & Purchase

View Sales and Distribution Offices

沪ICP备09046653号
content here.
content here.

Review this Product

Close