Please contact the RF Tuner Group for sample availability and additional technical information.

The ITD2010 is a highly integrated CMOS single chip low-IF single-conversion tuner IC for digital TV. It has dual RF inputs as VHF (90 ~ 222 MHz) and UHF (470 ~ 770 MHz). It supports 1-segment and 3-segment of ISDB-T standard. It includes VHF/UHF LNAs, VHF/UHF PGAs, VHF/UHF image-rejection down-conversion mixers, a bandwidth adjustable low pass filter, an IF variable gain amplifier, a VCO and a fractional-N PLL, etc. On-chip low phase noise VCO along with high resolution fractional-N frequency synthesizer make in-band phase noise lower than that of any other conventional tuners.

The ITD2010 exhibits ultra low power consumption, while conventional tuners consume over 1 watt. Using small 40-lead QFN [LFCSP_UQ] package, the ITD2010 is the best solution for highly integrated multi-tuner system and portable application where low power consumption is required. It has an industry standard I²C serial bus interface. Primary application of the ITD2010 is the portable analog/digital terrestrial TV receiver such as mobile TV phone.

Product Highlights

1. Single chip synthesized tuner for terrestrial digital TV receiver
2. Low-IF single-conversion architecture which eliminates all SAW filters
3. Low power consumption: 100 ~ 120 mW

Applications

ISDB-T (1-seg, 3-seg) Digital TV for Mobile Phone

Digital Terrestrial TV and Set-Top Boxes

Low Power Portable TV, PDA, Mobile Phone

Part#	Mobile TV Standard	Product Description	Power Consumption (mW)	Size (mm²)
ADMTV102	CMMB/DTMB, DVB-H/DVB-T	VHF/UHF RF Tuner	200	5 x 5
ADMTV202	ISDB-T	1seg RF Tuner	75	2.1 x 2.1
ADMTV300	T-DMB/DAB	Band-III/L-band/FM Triple-band RF Tuner	70/78 (Band III/L-Band)	5 x 5
ADMTV315	T-DMB/DAB	Band-III/L-band/FM Triple-band One-chip Receiver (SoC)	90/100 (Band III/L-Band)	7 x 7
ADMTV316	T-DMB/DAB	Band-III/FM Dual-channel One-chip Receiver (SoC)	180 (Dual Channel)	9 x 9
ADMTV340	CMMB	S-Band RF Tuner	150	5 x 5
ITD2010	ISDB-T	1&3seg Dual Band RF Tuner	100	6 x 6
ITD3010	T-DMB/DAB	Band-III/FM RF Tuner	100	6 x 6
ITD3020	T-DMB/DAB	Band-III/L-band/FM Triple-band RF Tuner	100/160 (Band III/L-Band)	6 x 6
MTV211	ISDB-T	1seg One-chip Receiver (SiP)	140	9 x 9
MTV320	S-DMB	Diversity S-DMB RF Tuner	140	5 x 5
MTV330	S/T-DMB	T-DMB/S-DMB One-chip Tuner	100/140 (T-DMB/S-DMB)	6 x 6

The model number is a specific version of a generic that can be purchased or sampled.

Status indicates the current lifecycle of the product. This can be one of 4 stages:

• Pre-Release: The model has not been released to general production, but samples may be available.
• Production: The model is currently being produced, and generally available for purchase and sampling.
• Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
• Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).

The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

For detailed drawings and chemical composition please consult our  Package Site

Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

This is the acceptable operating range of the device. The various ranges specified are as follows:

• Commercial: 0 to +70 degrees Celsius
• Military : -55 to +125 degrees Celsius
• Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
• Automotive: -40 to +125 degrees Celsius

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.
Sample availability may be better than production availability. Please enter samples into your cart to check sample availability.

Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.