Add to Signal Chain Designer

AD827:  High Speed, Low Power Dual Op Amp

Product Details

The AD827 is a dual version of Analog Device's industry-standard AD847 op amp. Like the AD847, it provides high speed, low power performance at low cost. The AD827 achieves a 300 V/µs slew rate and 50 MHz unity-gain bandwidth while consuming only 100 mW when operating from ±5 volt power supplies. Performance is specified for operation using ±5 V to ±15 V power supplies.

The AD827 offers an open-loop gain of 3,500 V/V into 500 Ohm loads. It also features a low input voltage noise of 15 nV/(root)Hz, and a low input offset voltage of 2 mV maximum. Common-mode rejection ratio is a minimum of 80 dB. Power supply rejection ratio is maintained at better than 20 dB with input frequencies as high as 1 MHz, thus minimizing noise feedthrough from switching power supplies.

The AD827 is also ideal for use in demanding video applications, driving coaxial cables with less than 0.04% differential gain and 0.19° differential phase errors for 643 mV p-p into a 75 Ohm reverse terminated cable.

The AD827 is also useful in multichannel, high speed data conversion systems where its fast (120 ns to 0.1%) settling time is of importance. In such applications, the AD827 serves as an input buffer for 8-bit to 10-bit A/D converters and as an output amplifier for high speed D/A converters.


  • High Speed
    50 MHz Unity Gain Stable Operation
    300 V/µs Slew Rate
    120 ns Settling Time
    Drives Unlimited Capacitive Loads
  • Excellent Video Performance
    0.04% Differential Gain @ 4.4 MHz
    0.198 Differential Phase @ 4.4 MHz
  • Good DC Performance
    2 mV max Input Offset Voltage
    15 mV/8C Input Offset Voltage Drift
    Available in Tape and Reel in
    Accordance with EIA-481A Standard
  • Low Power
    Only 10 mA Total Supply Current for
    Both Amplifiers ±5 V to ±15 V

Pin Configuration for AD827


Title Content Type File Type
AD827: High Speed, Low Power Dual Op Amp Data Sheet (Rev C, 08/2002) (pdf, 222 kB) Data Sheets PDF
AD827: Military Data Sheet  (Rev C, 09/2001) (pdf) Data Sheets PDF
AN-581: Biasing and Decoupling Op Amps in Single Supply Applications  (pdf, 166 kB) Application Notes PDF
AN-402: Replacing Output Clamping Op Amps with Input Clamping Amps  (pdf, 55 kB)
So far most clamping amplifiers have relied upon an output clamping architecture and are called output clamp amps (OCAs). A new architecture called an input clamp amp (ICA) offers superior clamping accuracy and lower distortion.
Application Notes PDF
AN-417: Fast Rail-to-Rail Operational Amplifiers Ease Design Constraints in Low Voltage High Speed Systems  (pdf, 228 kB)
Movement towards lower power supply voltages is driven by the demand that systems consume less and less power coupled with the desire to reduce the number of power supply voltages in the system. The following applications are discussed: Single-Ended and Differential Input ADC Input Circuits, Video Line Driver, Active Filter, HDSL Transceiver, and Transformer Drive Circuits.
Application Notes PDF
MT-060: Choosing Between Voltage Feedback and Current Feedback Op Amps  (pdf, 62 kB) Tutorials PDF
MT-058: Effects of Feedback Capacitance on VFB and CFB Op Amps  (pdf, 66 kB) Tutorials PDF
MT-056: High Speed Voltage Feedback Op Amps  (pdf, 109 kB) Tutorials PDF
MT-053: Op Amp Distortion: HD, THD, THD + N, IMD, SFDR, MTPR  (pdf, 104 kB) Tutorials PDF
MT-052: Op Amp Noise Figure: Don't Be Misled  (pdf, 60 kB) Tutorials PDF
MT-050: Op Amp Total Output Noise Calculations for Second-Order System  (pdf, 38 kB) Tutorials PDF
MT-049: Op Amp Total Output Noise Calculations for Single-Pole System  (pdf, 40 kB) Tutorials PDF
MT-048: Op Amp Noise Relationships: 1/f Noise, RMS Noise, and Equivalent Noise Bandwidth  (pdf, 81 kB) Tutorials PDF
MT-047: Op Amp Noise  (pdf, 72 kB) Tutorials PDF
MT-032: Ideal Voltage Feedback (VFB) Op Amp  (pdf, 65 kB) Tutorials PDF
A Stress-Free Method for Choosing High-Speed Op Amps
A decision-tree approach to making the critical decision about high-speed op amp selection, including a look at some helpful tools.
Webcasts WEBCAST
Ask The Applications Engineer-25
Op Amps Driving Capacitive Loads

(Analog Dialogue, Vol. 31, No. 2, 1997)
Analog Dialogue HTML
ADI Warns Against Misuse of COTS Integrated Circuits  (pdf, 13 kB)
(Revised 1/03)
Invites Customer Participation in Creative Mil/Aero System Solutions
Recommended Reading PDF
Space Qualified Parts List  (pdf, 93 kB)
This document lists 67 (240+) space level products that are available from Analog Devices. Many of the products listed are state-of-the-art data conversion and signal processing products that were previously only available as commercial or military Class B products. Through our Space Products Group and MIL-PRF-38535 certified Level V (Class S) facility, we are pleased to offer these products to the space marketplace.
Aerospace Information PDF
High Speed Amplifiers Selection Table  (pdf, 77 kB) Product Selection Guide PDF
RAQs index Rarely Asked Questions HTML
Glossary of EE Terms Glossary HTML

Design Tools,Models,Drivers & Software

Title Content Type File Type
dBm/dBu/dBv Calculator
This calculator converts between standard units of power measurement and signal strength.
Utilities and Conversions HTML
Power Dissipation vs Die Temp
This tool estimates die temperature and power dissipation based on the supply voltages, ambient temperature, load characteristics, and package thermal data.
Utilities and Conversions HTML
This tool will help with the selection, evaluation and troubleshooting of voltage feedback Op-Amps. It uses typical data to model the behavior of a selected amplifier. It allows a user to select an amplifier, configure a circuit, apply a signal and evaluate the performance. It is useful for checking an amplifier's spec's such as Bandwidth, Slew Rate, Input/Output Range, Gain Error, Load Current, Stability Issues and DC Errors in a given circuit.
ADIsim Design/Simulation Tools HTML
OpAmp Stability
An applet for demonstrating stability effects in opamp buffers.
Design Calculators HTML
AD827 SPICE Macro Model SPICE Models HTML

Evaluation Kits & Symbols & Footprints

Symbols and Footprints— Analog Devices offers Symbols & Footprints which are compatible with a large set of today’s CAD systems for broader and easier support.

SampleSample & Buy

Price, packaging, availability

AD827 Model Options
Model Package Pins Temp.
Price*(100-499) Price*1000 pcs RoHS View PCN/ PDN Check Inventory/
5962-9211701M2A Status: Production LCC:CER LEADLESS CHIP CARR 20 Mil Tube, 54 $84.61 $80.45 N  Material Info PCN Purchase
5962-9211701MPA Status: Production 8 ld CerDIP 8 Mil Tube, 48 $37.24 $33.52 N  Material Info PCN Purchase
AD827AQ Status: Production 8 ld CerDIP 8 Ind Tube, 48 $9.83 $8.88 N  Material Info PCN Purchase
AD827JCHIPS Status: Production CHIPS OR DIE 0 Comm. Tray, 140 - $8.80 Y  Material Info Notify Me Contact ADI
AD827JN Status: Production 8 ld PDIP 8 Comm. Tube, 50 $7.15 $6.46 N  Material Info PCN Purchase
AD827JNZ Status: Production 8 ld PDIP 8 Comm. Tube, 50 $6.52 $5.89 Y  Material Info PCN Purchase
AD827JR-16 Status: Last Time Buy 16 ld SOIC - Wide 16 Comm. Tube, 47 $7.15 $6.46 N  Material Info PCN/PDN Purchase
AD827JRZ-16 Status: Production 16 ld SOIC - Wide 16 Comm. Tube, 47 $6.52 $5.89 Y  Material Info PCN Purchase
AD827JRZ-16-REEL Status: Production 16 ld SOIC - Wide 16 Comm. Reel, 1000 - $5.89 Y  Material Info PCN Purchase
AD827JRZ-16-REEL7 Status: Production 16 ld SOIC - Wide 16 Comm. Reel, 250 - $5.89 Y  Material Info PCN Purchase
AD827SCHIPS Status: Production CHIPS OR DIE 0 Mil Tray, 140 $25.18 $22.89 Y  Material Info Notify Me Contact ADI
AD827SE/883B Status: Production LCC:CER LEADLESS CHIP CARR 20 Mil Tube, 54 $93.05 $84.13 N  Material Info PCN Purchase
AD827SQ Status: Production 8 ld CerDIP 8 Mil Tube, 48 $27.31 $24.69 N  Material Info PCN Purchase
AD827SQ/883B Status: Production 8 ld CerDIP 8 Mil Tube, 48 $40.97 $37.04 N  Material Info PCN Purchase
Price Table Help

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

content here.
content here.

Review this Product