The OP777, OP727 and OP747 are precision single, dual and quad rail-to-rail output single supply amplifiers featuring micropower operation and rail to rail output ranges. These amplifiers provide improved performance over the industry standard OP07 with ±15V supplies and offer the further advantages of true single supply operation down to +2.7V and smaller package options than any other high voltage precision bipolar amplifier. Outputs are stable with capacitive loads of over 1000pF. Supply current is less than 300....A per amplifier at 5V. 500 series resistors protect the inputs, allowing input signal levels several volts above the positive supply without phase reversal.

Part#	Small Signal Bandwidth	Slew Rate	Vos	Ib	V Noise Density	Amplifiers Per Package	Widest Temp Range (°C)
OP177	600KHz	300mV/µs	10µV	1.2nA	11nV/rtHz	1	-40 to +85
OP777	700KHz	200mV/µs	20µV	5.5nA	15nV/rtHz	1	-40 to +85
OP1177	1.3MHz	700mV/µs	15µV	500pA	7.9nV/rtHz	1	-40 to +125
AD8605	10MHz	5V/µs	20µV	200fA	6.5nV/rtHz	1	-40 to +125
AD8675	10MHz	2.5V/µs	10µV	500pA	2.8nV/rtHz	1	-40 to +125
AD8671	10MHz	4V/µs	20µV	3nA	2.8nV/rtHz	1	-40 to +125
AD8698	1MHz	400mV/µs	20µV	700pA	8nV/rtHz	2	-40 to +85
OP07	600KHz	300mV/µs	30µV	1nA	9.6nV/rtHz	1	-40 to +85
AD820	1.9MHz	3V/µs	100µV	2pA	13nV/rtHz	1	-40 to +85
AD8510	8MHz	20V/µs	80µV	21pA	7.6nV/rtHz	1	-40 to +85
AD8067	54MHz	640V/µs	200µV	600fA	6.6nV/rtHz	1	-40 to +85

The model number is a specific version of a generic that can be purchased or sampled.

Status indicates the current lifecycle of the product. This can be one of 4 stages:

• Pre-Release: The model has not been released to general production, but samples may be available.
• Production: The model is currently being produced, and generally available for purchase and sampling.
• Last Time Buy: The model has been scheduled for obsolescence, but may still be purchased for a limited time.
• Obsolete: The specific part is obsolete and no longer available. Other models listed in the table may still be available (if they have a status that is not obsolete).

The package for this IC (i.e. DIP, SOIC, BGA). An Evaluation Board is a board engineered to show the performance of the model, the part is included on the board.

For detailed drawings and chemical composition please consult our  Package Site

Pin Count is the number of pins, balls, or pads on the device. Pin-out diagrams & pin function descriptions may be found in the datasheet.

This is the acceptable operating range of the device. The various ranges specified are as follows:

• Commercial: 0 to +70 degrees Celsius
• Military : -55 to +125 degrees Celsius
• Industrial: Temperature ranges may vary by model. Please consult the datasheet for more information.
• Automotive: -40 to +125 degrees Celsius

The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

This is the date Analog Devices, Inc. anticipates that the product will ship from the warehouse. Most orders ship within 48 hours of this date.Once an order has been placed, Analog Devices, Inc. will send an Order Acknowledgement email to confirm your delivery date. It is important to note the scheduled dock date on the order entry screen. We do take orders for items that are not in stock, so delivery may be scheduled at a future date. Also, please note the warehouse location for the product ordered. We have warehouses in the United States, Europe and Southeast Asia. Transit times from these sites may vary.
Sample availability may be better than production availability. Please enter samples into your cart to check sample availability.

Due to environmental concerns, ADI offers many of our products in lead-free versions. For more information about lead-free parts, please consult our Pb (Lead) free information page.