ADP130

PRODUCTION

350 mA, Low V_IN, Low Quiescent Current, CMOS Linear Regulator

Data Sheet (Rev. C) Product Selection Table

Part Models: 4
1ku List Price: Starting From $0.44

Viewing:

Overview

350 mA maximum output current
Input voltage supply range
V_BIAS = 2.3 V to 5.5 V
V_IN = 1.2 V to 3.6 V
2.3 V < V_IN < 3.6 V, V_IN can be tied to VBIAS
Very low dropout voltage: 17 mV @ 100 mA load
Low quiescent current: 25 μA @ no load
Low shutdown current: <1 μA
±1% accuracy @ 25°C

Excellent PSRR performance: 70 dB @ 10 kHz
Excellent load/line transient response
Optimized for small 1 μF ceramic capacitors
Current limit and thermal overload protection
Logic controlled enable
5-lead TSOT package

The ADP130 is a low quiescent current, low dropout linear regulator. It is designed to operate in dual-supply mode with an input voltage as low as 1.2 V to increase efficiency and provide up to 350 mA of output current. The low 17 mV dropout voltage at a 100 mA load improves efficiency and allows operation over a wider input voltage range.

A dual-supply power solution typically improves conversion efficiency over a single-supply solution because the higher V_BIAS supply powers the part, and the lower V_IN supply delivers current to the load. The power dissipated in the device is thereby reduced. The ADP130 is optimized for stable operation with small 1 μF ceramic output capacitors. The ADP130 delivers good transient performance with minimal board area.

The ADP130 is available in fixed output voltages ranging from : 0.80 V to 3.0 V.

The ADP130 has a typical internal soft start time of 200 μs. Short-circuit protection and thermal overload protection circuits prevent damage in adverse conditions. The ADP130 is available in a tiny 5-lead TSOT package for the smallest footprint solution to meet a variety of portable power applications.

Applications

Mobile phones

Digital camera and audio devices

Portable and battery-powered equipment

Post dc-to-dc regulation

Data Sheet, Rev. 0, 8/08

Part Models: 4
1ku List Price: Starting From $0.44

Documentation

Frequently Asked Question 1

FAQ 09/05/2025

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal. View our quality and reliability program and certifications for more information.

Part Model	Pin/Package Drawing	Documentation	CAD Symbols, Footprints, and 3D Models
ADP130AUJZ-1.2-R7	5-Lead TSOT	Material Declaration Reliablity Data Package Resources	Ultra Librarian SamacSys
ADP130AUJZ-1.5-R7	5-Lead TSOT	Material Declaration Reliablity Data Package Resources	Ultra Librarian SamacSys
ADP130AUJZ-1.8-R7	5-Lead TSOT	Material Declaration Reliablity Data Package Resources	Ultra Librarian SamacSys
ADP130AUJZ-2.5-R7	5-Lead TSOT	Material Declaration Reliablity Data Package Resources	Ultra Librarian SamacSys

Part Models	Product Lifecycle	PCN

Jun 25, 2012 - 12_0141 ADP130 Data Sheet Correction
		PCN12_0141_Form Material_Report
ADP130AUJZ-1.2-R7	PRODUCTION
ADP130AUJZ-1.5-R7	PRODUCTION
ADP130AUJZ-1.8-R7	PRODUCTION
ADP130AUJZ-2.5-R7	PRODUCTION

This is the most up-to-date revision of the Data Sheet.

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Hardware Ecosystem

Parts	Product Life Cycle	Description
ADP170	PRODUCTION	300 mA, Low Quiescent Current, fixed-output, CMOS Linear Regulator
LT1962	RECOMMENDED FOR NEW DESIGNS	300mA, Low Noise, Micropower LDO Regulators

Tools & Simulations

ADI Linear Regulator Design Tool and Parametric Search

Microsoft Excel download tool from ADIsimPower to generate a power supply design complete with a schematic, bill of materials, and performance specifications.

Open Tool

Evaluation Kits

ADP130 Evaluation Board

Buy Now View Details

Features and Benefits

Two fully assembled and tested evaluation boards per kit
Full set of IC voltage options in each kit
3 samples of each IC voltage option packed in separate antistatic bags
Kit allows the user to quickly evaluate all IC voltage options
Only need to order one kit per product family

Product Details

This product has individual evaluations boards at specific voltages or with specific features as well as the RedyKit&tm;. The RedyKit simplifies product evaluation by providing two assembled and tested evaluation boards, plus a full set of product (voltage) options for an IC regulator. All the IC options come sorted and stored in the kit with the Analog Devices part number clearly printed on each antistatic zip-top bag.

Simple device measurements such as line and load regulation, dropout, and ground current can be demonstrated with just a single voltage supply, a voltmeter, a current meter, and load resistors.

Resources

ADP130 Evaluation Board Documentation for 350 mA, Low VIN, Low Quiescent Current, CMOS Linear Regulator
8/29/2008

Power Management RedyKit
4/12/2010

Latest Discussions

2 Years Ago

7 Years Ago