AD10677

过期

16 Bit, 65 MSPS A/D Converter

数据手册 (Rev. D)
产品技术资料帮助

ADI公司所提供的资料均视为准确、可靠。但本公司不为用户在应用过程中侵犯任何专利权或第三方权利承担任何责任。技术指标的修改不再另行通知。本公司既没有含蓄的允许，也不允许借用ADI公司的专利或专利权的名义。本文出现的商标和注册商标所有权分别属于相应的公司。
Viewing:

概述

  • 65 MSPS Guaranteed Sample Rate
  • 80dBFS Signal-to-Noise Ratio
  • Transformer Coupled Analog Input
  • Single PECL Clock Source
  • Digital Outputs
    True Binary Format
    3.3 V and 5 V CMOS Compatible

The AD10677 is a 16-bit, high performance, analog-to-digital converter for applications that demand increased SNR levels. Exceptional noise performance and a typical signal-to-noise ratio of 80dB is obtained by digitally post processing the outputs of four ADCs. Only a single analog input and PECL sampling clock are required as well as 3.3 V and 5 V power supplies.

The AD10677 is assembled using a 0.062" thick laminate board with three sets of connector interface pads to accommodate analog and digital isolation. Analog Devices recommends using the following connector from Samtec: FSI-110-03-G-D-AD-K-TR. The overall card fits a 2.2" x 2.8" PCB specified from 0°C to +70°C.

Applications
  • Low Signature Radar
  • Medical Imaging
  • Communications Instrumentation
  • Instrumentation
  • Antenna Array Processing

    •
    AD10677
    16 Bit, 65 MSPS A/D Converter
    162254599AD10677-fbl
    添加至 myAnalog

    将产品添加到myAnalog 的现有项目或新项目中（接收通知）。

    创建新项目
    提问

    参考资料

    数据手册 1

    应用笔记 8

    技术文章 3

    交叉参考指南 4

    了解更多
    添加至 myAnalog

    Add media to the Resources section of myAnalog, to an existing project or to a new project.

    创建新项目

    工具及仿真模型

    Visual Analog

    对于正在选择或评估高速ADC的设计工程师，VisualAnalog™是一个将一组功能强大的仿真和数据分析工具与一个用户友好的图形界面集成在一起的软件包。

    打开工具

    最新评论

    需要发起讨论吗？ 没有关于 AD10677的相关讨论？是否需要发起讨论？

    在EngineerZone®上发起讨论

    近期浏览