1. 製品
  2. アンプ
  3. オペアンプ(OPアンプ)
  4. 電流帰還型オペアンプ
  5. AD844S


製品概要

機能と利点

  • Wide Bandwidth: 60 MHz at Gain of -1
  • Wide Bandwidth: 33 MHz at Gain of -10
  • Very High Output Slew Rate
  • 20 MHz Full Power Bandwidth typical, 20 V p-p, RL = 500 Ω
  • Fast Settling
  • Differential Gain Error: 0.03% at 4.4 MHz
  • Differential Phase Error: 0.158 at 4.4 MHz
  • Low Quiescent Current: 6.5 mA typical

製品概要

The AD844 is a high speed monolithic operational amplifier fabricated using Analog Devices' junction isolated complementary bipolar (CB) process. It combines high bandwidth and very fast large signal response with excellent dc performance. Although optimized for use in current to voltage applications and as an inverting mode amplifier, it is also suitable for use in many non-inverting applications.

The AD844 can be used in place of traditional op amps, but its current feedback architecture results in much better ac performance, high linearity and an exceptionally clean pulse response.

This type of op amp provides a closed-loop bandwidth which is determined primarily by the feedback resistor and is almost independent of the closed-loop gain. The AD844 is free from the slew rate limitations inherent in traditional op amps and other current-feedback op amps. Peak output rate of change can be over 2000 V/µs for a full 20 V output step. Settling time is typically 100 ns to 0.1%, and essentially independent of gain. The AD844 can drive 50 Ohm loads to ±2.5 V with low distortion and is short circuit protected to 80 mA.

製品ライフサイクル icon-recommended 製造中

この製品ファミリーの1つ以上の型番が生産/供給中です。新規の設計に適していますが、より新しい代替製品を提供している場合があります。

ツールおよびシミュレーション

設計ツール

VRMS/dBm/dBu/dBVカリキュレータ

電力測定値と信号強度の標準的な単位変換を行うためのユーティリティです。

設計リソース

アナログ・デバイセズでは、最高レベルの品質と信頼性を備えた製品を提供することに最大の力を常に注いでいます。これを実現するため、製品およびプロセスの設計のあらゆる観点で品質と信頼性のチェックを行っています。そして、それは、製造工程においても同様です。アナログ・デバイセズは常に、出荷製品の「ゼロ・ディフェクト」を目指しています。詳細についてはアナログ・デバイセズの品質および信頼性プログラム/認定証をご覧ください。

製品番号 材料宣誓書(MD) 信頼性データ ピン/パッケージ図 CADシンボル、フットプリント & 3Dモデル
5962L8964402VPA 材料宣誓書(MD) 信頼性データ 8 ld CerDIP
5962R8964401VPA 材料宣誓書(MD) 信頼性データ 8 ld CerDIP
ウェハ・ファブリケーション・データ

PCN-PDN情報

以下ドロップダウンからモデルを選択しPCN/PDN通知に登録してください。過去の通知も参照できます。

サンプル&購入


ご注文に関するFAQ


オンライン注文や支払い方法などに関する質問については、 ご注文に関するFAQをご覧ください。

 

購入価格


(**) 表示されている価格と価格範囲は、少量の注文に基づくものです。

 

リスト価格


(*)価格は1Ku当たりの米ドルで、米国内における販売価格(FOB)で表示されておりますので、予算のためにのみご使用いただけます。また、その価格は変更されることがあります。米国以外のお客様への価格は、輸送費、各国の税金、手数料、為替レートにより決定されます。価格・納期等の詳細情報については、弊社正規販売代理店. または担当営業にお問い合わせください。なお、 評価用ボードおよび評価用キットの表示価格は1個構成としての価格です。

 

リードタイム


リードタイムに関する当社CCOからの最新のご案内をご確認ください。

 

サンプル請求について


上記の「サンプル注文」ボタンをクリックすると、サードパーティのADIサンプルサイトにリダイレクトされます。選択された部品は、ログイン後、当サイトのカートに引き継がれます。当サイトを利用したことがない場合は、新規にアカウントを作成してください。サンプルサイトに関するご質問は、 カスタマーサービスへお問合せ ください。

 

モデル一覧の項目説明