MX7548

PRODUCTION

CMOS, 8-Bit-Compatible, 12-Bit DAC

Data Sheet (Rev. 0) Product Selection Table
Viewing:

Overview

  • 8-Bit Bus Compatible
  • Versatile µP Interface with Selectable Data Format and Data Override
  • Fast Interface Timing—120ns min Write Pulse Width
  • All Grades 12-Bit Monotonic Over Temperature
  • ±1 LSB max Gain Accuracy
  • Operation specified at +5V, +12V or +15V Supply Voltages
  • Small Footprint Packages
  • High ESD Resistance

The MX7548 is a 12-bit CMOS, current output, multiplying digital-to-analog converter (DAC) with a versatile interface for microprocessors using 8-bit busses. The MX7548 accepts data into its input-registers in two bytes in either left- or right-justified format, lease significant byte or most significant byte first. Standard active-low WR and active-low CSLSB or active-low SCMSB inputs control the data load operation. A separate active-low LDAC input controls transfer of data from the input register to the DAC register allowing for simultaneous update of all DACs in multi-DAC systems. A data override input forces the DAC output to full-scale or zero-code without altering the contents of the input registers. This permits the user to perform DAC calibration conveniently without having to load calibration data into the DAC.

The MX7548 works with a single +5V, +12V or +15V power supply, and the electrical characteristics are specified at all of these supply voltages. All digital inputs are TTL and +5V-CMOS compatible with any of these supply voltages. Maxim MX7548 uses low tempco thin-film resistors which are laser trimmed to ±¼ LSB linearity and better than ±1 LSB gain accuracy. The digital inputs are designed with improved ESD protection and can typically withstand over 5,000V of ESD voltages. The MX7548 is supplied in 20-lead narrow DIP, PLCC, and Small Outline packages.

Applications

  • µP-Controlled Systems
  • Automatic Test Equipment
  • Digitally Controlled Filters
  • Motion Control Systems
  • Process Control
  • Programmable Gain Amplifiers
  • Programmable Power Supplies
MX7548
CMOS, 8-Bit-Compatible, 12-Bit DAC
MX7548: Functional Block Diagram
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet 2

Technical Articles 1

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Latest Discussions

No discussions on MX7548 yet. Have something to say?

Start a Discussion on EngineerZone®

Recently Viewed