MAX9101

PRODUCTION

+1.0V Micropower SOT23 Comparators

Data Sheet (Rev. 1) Product Selection Table
Viewing:

Overview

  • Ultra-Low Voltage: Guaranteed Down to 1.0V
  • Low Quiescent Current: 5µA
  • Optimized for Single-Cell Battery-Powered Systems
  • Wide Input Common-Mode Range
  • CMOS Rail-to-Rail Output Swing (MAX9100)
  • Open-Drain Output (MAX9101)
  • 4µs Propagation Delay
  • High Output Drive Capability: 5mA Sink and Source (MAX9100)
  • No Output Phase Reversal for Overdriven Inputs
  • Available in Tiny SOT23-5 Package

The MAX9100/MAX9101 micropower comparators are optimized for single-cell systems, and are fully specified for operation from a single supply of 1.0V to 5.5V. This ultra-low voltage operation, 5µA quiescent current consumption, and small footprint make the MAX9100/MAX9101 ideal for use in battery-powered systems. A wide-input common-mode range that includes the negative rail and rail-to-rail output swing allows almost all of the power supply to be used for signal voltage. In addition, propagation delay is less than 4µs, and rise and fall times are 100ns.

The MAX9100 features a push-pull CMOS output stage that sinks and sources current with large internal output drivers that allow rail-to-rail output swings with loads up to 5mA.The MAX9101 has an open-drain output stage that makes it suitable for mixed-voltage designs.

The MAX9100/MAX9101 are available in tiny SOT23-5 packages.

Applications

  • Battery-Powered Applications
  • Closed Sensor Applications
  • Pagers
  • Portable Communication Devices
  • Portable Electronic Equipment
  • Single-Cell Systems
MAX9101
+1.0V Micropower SOT23 Comparators
MAX9100, MAX9101: Pin Configuration
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet 1

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Hardware Ecosystem

Parts Product Life Cycle Description
Comparators 5
MAX986
PRODUCTION Micropower, Low-Voltage, UCSP/SC70, Rail-to-Rail I/O Comparators
MAX987
PRODUCTION High-Speed, Micropower, Low-Voltage, Rail-to-Rail I/O Comparators
MAX988
PRODUCTION High-Speed, Micropower, Low-Voltage, Rail-to-Rail I/O Comparators
MAX919
PRODUCTION SOT23, 1.8V, Nanopower, Beyond-the-Rails Comparators With/Without Reference
MAX920
PRODUCTION SOT23, 1.8V, Nanopower, Beyond-the-Rails Comparators With/Without Reference
Modal heading
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project

Latest Discussions

No discussions on MAX9101 yet. Have something to say?

Start a Discussion on EngineerZone®

Recently Viewed