Two engineers working in the lab

Save time and deliver your solutions faster with ADI’s new suite of precision technology signal chains. Align your applications ranging from Smart Industry to Instrumentation, Electrification to Digital Health, to exactly the right precision technology combinations.

Tailor your signal chain with confidence

MAX6143

PRODUCTION

High-Precision Voltage Reference with Temperature Sensor

Data Sheet (Rev. 1) Product Selection Table
Viewing:

Overview

  • Wide (VOUT + 2V) to +40V Supply Voltage Range
  • Excellent Temperature Stability: 3ppm/°C (max)
  • Tight Initial Accuracy: 0.05% (max)
  • Low Noise: 3.8µVP-P (typ at 2.5V Output)
  • Sources up to 30mA Output Current
  • Low Supply Current: 450µA (max at +25°C)
  • Low 0.01µA Shutdown Current
  • Linear Temperature Transducer Voltage Output
  • +2.5V, +3.3V, +4.096V, +5.0V, or +10V Output Voltages
  • Wide Operating Temperature Range: -40°C to +125°C
  • No External Capacitors Required for Stability

The MAX6143 is a low-noise, high-precision voltage reference. The device features a proprietary temperature-coefficient curvature-correction circuit and laser-trimmed thin-film resistors that result in a very low 3ppm/°C temperature coefficient and excellent ±0.06% initial accuracy. The MAX6143 provides a TEMP output where the output voltage is proportional to die temperature, making the device suitable for a wide variety of temperature-sensing applications. The device also provides a TRIM input, allowing fine trimming of the output voltage with a resistive-divider network. Low temperature drift and low noise make the MAX6143 ideal for use with high-resolution A/D or D/A converters.

The MAX6143 provides accurate preset +2.5V, +3.3V, +4.096V, +5.0V, and +10V reference voltages and accepts input voltages up to +40V. The device draws 340µA of supply current and sources 30mA or sinks 2mA of load current. The MAX6143 uses bandgap technology for low-noise performance and excellent accuracy. The MAX6143 does not require an output bypass capacitor for stability, and is stable with capacitive loads up to 100µF. Eliminating the output bypass capacitor saves valuable board area in space-critical applications.

The MAX6143 is available in an 8-pin SO package and operates over the automotive (-40°C to +125°C) temperature range.

Applications

  • A/D Converters
  • D/A Converters
  • Digital Voltmeters
  • Threshold Detectors
  • Voltage Regulators
MAX6143
High-Precision Voltage Reference with Temperature Sensor
pdp-image-unavailable
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet 1

Reliability Data 1

Design Note 2

Technical Articles 4

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Hardware Ecosystem

Parts Product Life Cycle Description
Voltage References 4
REF01
NOT RECOMMENDED FOR NEW DESIGNS +5V, +10V Precision Voltage References
REF02
NOT RECOMMENDED FOR NEW DESIGNS +5V, +10V Precision Voltage References
MAX674
PRODUCTION +10V Precision Voltage Reference
MAX675
PRODUCTION Precision, +5V Voltage Reference, Replaced MAX673
Modal heading
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project

Latest Discussions

No discussions on MAX6143 yet. Have something to say?

Start a Discussion on EngineerZone®

Recently Viewed