MAX4987AE
PRODUCTIONOvervoltage-Protection Controller with USB ESD Protection
Overvoltage-Protection Controller with ESD Protection for High-Speed USB Interface
- Part Models
- 2
- 1ku List Price
- Starting From $3.26
Overview
- Input Voltage Protection Up to +28V
- Integrated Low RON (100mΩ) nFET Switch
- Internal Overcurrent Protection 1.5A (min)
- Overcurrent Protection (Autoretry)
- Enable Input
- Internal 30ms Startup Delay
- Low-Capacitance USB High-Speed Data Line ESD Protection (3pF)
- ±15kV Human Body Model
- ±15kV IEC 61000-4-2 Air Gap
- ±6kV IEC 61000-4-2 Contact
- Thermal-Shutdown Protection
- 2mm x 3mm, 8-Pin TDFN Package
The MAX4987AE are overvoltage protection devices with built-in ESD protection for USB data lines. These devices feature a low 100mΩ (typ) RON internal nFET switch and protect low-voltage systems against voltage faults up to +28V. When the input voltage exceeds the overvoltage threshold or decreases below the under-voltage threshold, the internal nFET switch is turned off to prevent damage to the protected components.
All switches feature a minimum 1.5A current-limit protection. During a short-circuit occurrence, the switch operates in an autoretry mode where the internal nFET switch is turned on to check if the fault has been removed. The autoretry interval is 30ms, and if the fault is removed, the nFET switch remains on.
The MAX4987AE feature low-capacitance (3pF) ESD protection for USB data lines that allow transmission of high-speed USB 2.0 signals.
The overvoltage threshold (OVLO) is preset to 6.15V. The undervoltage thresholds (UVLO) are preset to 2.55V (MAX4987AE). When the input voltage drops below the undervoltage (UVLO) threshold, the devices enter a low-current standby mode.
All devices are offered in a small 2mm x 3mm, 8-pin TDFN package and operate over the -40°C to +85°C extended temperature range.
Applications
- Cell Phones
- Media Players
Documentation
Data Sheet 1
Technical Articles 1
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal. View our quality and reliability program and certifications for more information.
| Part Model | Pin/Package Drawing | Documentation | CAD Symbols, Footprints, and 3D Models |
|---|---|---|---|
| MAX4987AEETA+ | LFCSP | ||
| MAX4987AEETA+T | LFCSP |
This is the most up-to-date revision of the Data Sheet.
Software Resources
Can't find the software or driver you need?
Request a Driver/SoftwareLatest Discussions
No discussions on MAX4987AE yet. Have something to say?
Start a Discussion on EngineerZone®