1. Products
  2. Power Management
  3. LED Driver IC
  4. Step-Up (Boost) LED Drivers
  5. MAX16814


Overview

Features and Benefits

  • Cost-Effective 4-Channel Linear LED Current Sinks for Wide Range of LED Lighting Applications
    • Drives One to Four LED Strings
    • 4.75V to 40V Input Voltage Range
    • Full-Scale LED Current Adjustable from 20mA to 150mA
    • 5000:1 PWM Dimming at 200Hz
    • Less than 40µA Shutdown Current
  • Minimal Component Count Saves Cost and Space
    • Internal MOSFET for Each Channel
    • Internal Current-Mode Switching DC-DC Controller Supporting Boost, Coupled-Inductor Boost-Buck,or SEPIC Topologies
    • 200kHz to 2MHz Programmable Switching Frequency for Optimizing Size vs. Efficiency
    • External Switching-Frequency Synchronization
  • Protection Features and Wide Operating Temperature Range Improves Reliability
    • Open-Drain Fault-Indicator Output
    • Open-LED and LED-Short Detection and Protection
    • Overtemperature Protection
    • Available in Thermally Enhanced 20-Pin TQFN, QFND, and TSSOP Packages
    • Operation Over -40°C to +125°C Temperature Range

Product Details

The MAX16814 high-efficiency, high-brightness LED (HB LED) driver provides up to four integrated LED current-sink channels. An integrated current-mode switching DC-DC controller drives a DC-DC converter that provides the necessary voltage to multiple strings of HB LEDs. The MAX16814 accepts a wide 4.75V to 40V input voltage range and withstands direct automotive load-dump events. The wide input range allows powering HB LEDs for small to medium-sized LCD displays in automotive and general lighting applications.

An internal current-mode switching DC-DC controller supports the boost, coupled-inductor boost-buck, or SEPIC topologies and operates in an adjustable frequency range between 200kHz and 2MHz. It can also be used for single-inductor boost-buck topology in conjunction with the MAX15054 and an additional MOSFET. The current-mode control with programmable slope compensation provides fast response and simplifies loop compensation. The MAX16814 also features an adaptive output-voltage control scheme that minimizes the power dissipation in the LED current-sink paths.

The MAX16814 consists of four identical linear current source channels to drive four strings of HB LEDs. The channel current is adjustable from 20mA to 150mA with an accuracy of ±3% using an external resistor. The external resistor sets all 4-channel currents to the same value. The device allows connecting multiple channels in parallel to achieve higher current per LED string. The MAX16814 also features pulsed dimming control, on all four channels through a logic input (DIM). In addition, the MAX16814A_ _ and MAX16814U_ _ include a unique feature that allows a very short minimum pulse width as low as 1µs.

The MAX16814 includes an output overvoltage, open-LED detection and protection, programmable shorted LED detection and protection, and overtemperature protection. The device operates over the -40°C to +125°C automotive temperature range. The MAX16814 is available in 6.5mm x 4.4mm, 20-pin TSSOP, 4mm x 4mm, 20-pin TQFN and QFND packages.

Applications

  • Architectural, Industrial, and Ambient Lighting
  • Automotive Displays LED Backlights
  • Automotive RCL, DRL, Front Position, and Fog Lights
  • LCD TV and Desktop Display LED Backlights

Product Lifecycle icon-recommended Production

At least one model within this product family is in production and available for purchase. The product is appropriate for new designs but newer alternatives may exist.

Evaluation Kits (1)

Tools & Simulations

SPICE Model

Product Recommendations

MAX16814 Companion Parts

Recommended Related Parts

Design Resources

ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well.  "Zero defects" for shipped products is always our goal.View our quality and reliability program and certifications for more information.

Part Number Material Declaration Reliability Data Pin/Package Drawing CAD Symbols, Footprints & 3D Models
MAX16814AGP/VY+ Material Declaration Reliability Data Quad Flatpack, Dimple Leads
MAX16814AGP/VY+T Material Declaration Reliability Data Quad Flatpack, Dimple Leads
MAX16814ATP+ Material Declaration Reliability Data 20-LFCSP-4X4X0.75
MAX16814ATP+T Material Declaration Reliability Data 20-LFCSP-4X4X0.75
MAX16814ATP/V+ Material Declaration Reliability Data 20-LFCSP-4X4X0.75
MAX16814ATP/V+C81 Material Declaration Reliability Data 20-LFCSP-4X4X0.75
MAX16814ATP/V+T Material Declaration Reliability Data 20-LFCSP-4X4X0.75
MAX16814ATP/V+TC81 Material Declaration Reliability Data 20-LFCSP-4X4X0.75
MAX16814AUP+ Material Declaration Reliability Data 20-TSSOP_4.4_EP-4.4_MM
MAX16814AUP+T Material Declaration Reliability Data 20-TSSOP_4.4_EP-4.4_MM
MAX16814AUP/V+ Material Declaration Reliability Data 20-TSSOP_4.4_EP-4.4_MM
MAX16814AUP/V+T Material Declaration Reliability Data 20-TSSOP_4.4_EP-4.4_MM
MAX16814BEUP+ Material Declaration Reliability Data 20-TSSOP_4.4_EP-4.4_MM
MAX16814BEUP+T Material Declaration Reliability Data 20-TSSOP_4.4_EP-4.4_MM
MAX16814BUTP+T Material Declaration Reliability Data 20-LFCSP-4X4X0.75
MAX16814BUUP+ Material Declaration Reliability Data 20-TSSOP_4.4_EP-4.4_MM
MAX16814BUUP+T Material Declaration Reliability Data 20-TSSOP_4.4_EP-4.4_MM
MAX16814CATP+ Material Declaration Reliability Data 20-LFCSP-4X4X0.75
MAX16814CATP+T Material Declaration Reliability Data 20-LFCSP-4X4X0.75
MAX16814UUP+TCJ3 Material Declaration Reliability Data 20-TSSOP_4.4_EP-4.4_MM
Wafer Fabrication Data MAX16814 Reliability Data

PCN-PDN Information

Select a model from the dropdown below to subscribe to PCN/PDN notifications and view past notifications as well.

Sample & Buy


Ordering FAQs


See our Ordering FAQs for answers to questions about online orders, payment options and more.

 

Buy Now Pricing


(**) Displayed Buy Now Price and Price Range is based on small quantity orders.

 

List Pricing


(*)The 1Ku list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.

 

Lead Times


Please see the latest communication from our CCO regarding lead times.

 

Sampling


A Sample link will be shown above, next to the part, only for parts that are included in our sample program. Selecting the Sample button will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.


Price Table Help