LTC1517-5

PRODUCTION

Micropower, Regulated 5V Charge Pump in a 5-Pin SOT-23 Package

Viewing:

Overview

  • Ultralow Power: ICC = 6µA Typ
  • Short-Circuit/Thermal Protected
  • 5V ±4% Regulated Output
  • VIN Range: 2.7V to 5V
  • Output Current:
    • 10mA (VIN > 2.7V)
    • 20mA (VIN > 3V)
  • No Inductors
  • Ultrasmall Application Circuit (0.045in2)
  • 800kHz Switching Frequency
  • Available in 5-Pin SOT-23

The LTC1517-5 is a micropower charge pump DC/DC converter that produces a regulated 5V output. The input voltage range is 2.7V to 5V. Extremely low operating current (typically 6µA with no load) and low external parts count (one 0.1µF flying capacitor and two small bypass capacitors at VIN and VOUT) make the part ideally suited for small, light load battery-powered applications. The total printed circuit board area of the application circuit shown below is only 0.045in2.

The part operates as a Burst Mode switched-capacitor voltage doubler to produce a regulated output. The part has thermal shutdown capability and can survive a continuous short circuit from VOUT to GND. The device is available in a 5-pin SOT-23 package.

Applications

  • Cellular Telephones
  • Battery-Operated Equipment
  • Local Power Supplies
  • Handheld Instruments
  • PCMCIA Supplies

LTC1517-5
Micropower, Regulated 5V Charge Pump in a 5-Pin SOT-23 Package
Typical Output Voltage vs Output Current Product Package 1
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet

This is the most up-to-date revision of the Data Sheet.

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Tools & Simulations

LTspice 1


Models for the following parts are available in LTspice:

  • LTC1517-3.3
  • LTC1517-5
LTspice

LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.


Evaluation Kits

DC174A-A
LTC1517CS5-5 Demo Board | Micropower Regulated 5V Charge Pump DC/DC Converter
DC174A-B
LTC1517CS5-3.3 Demo Board | Micropower Regulated 5V Charge Pump DC/DC Converter

Latest Discussions

No discussions on LTC1517-5 yet. Have something to say?

Start a Discussion on EngineerZone®

Recently Viewed