Not the part you were looking for?
Ask a Question
Submit your question below and we will return the best answer from ADI’s knowledge database:
Other places you can find help
Support
Analog Devices Support Portal is a one-stop shop to answer all your ADI questions.
Visit the ADI Support PageFeatures
- 80C52 Compatible
- High-Speed Architecture
- 4kB Internal SRAM Usable as Program/Data/Stack Memory
- Enhanced Memory Architecture
- Two Full-Function CAN 2.0B Controllers
- Two Full-Duplex Hardware Serial Ports
- Programmable IrDA Clock
- High Integration Controller
- 16 Interrupt Sources with Six External
- Available in 64-Pin LQFP, 68-Pin PLCC
The DS80C390 is a fast 8051-compatible microprocessor with dual CAN 2.0B controllers. The redesigned processor core executes 8051 instructions up to 3X faster than the original for the same crystal speed. The DS80C390 supports a maximum crystal speed of 40MHz, resulting in apparent execution speeds of 100MHz (approximately 2.5X). An optional internal frequency multiplier allows the microprocessor to operate at full speed with a reduced crystal frequency, reducing EMI. A hardware math accelerator further increases the speed of 32-bit and 16-bit multiply and divide operations as well as high-speed shift, normalization, and accumulate functions.
The High-Speed Microcontroller User's Guide and the High-Speed Microcontroller User's Guide: DS80C390 Supplement should be used in conjunction with this data sheet. Download both at www.maximintegrated.com/microcontrollers.
Applications
- Agricultural Equipment
- Factory Automation
- Gaming Equipment
- Heating, Ventilation, and Air Conditioning
- Industrial Controls
- Medical Equipment
Ask a Question
Submit your question below and we will return the best answer from ADI’s knowledge database:
Other places you can find help
Support
Analog Devices Support Portal is a one-stop shop to answer all your ADI questions.
Visit the ADI Support Page{{modalTitle}}
{{modalDescription}}
{{dropdownTitle}}
- {{defaultSelectedText}} {{#each projectNames}}
- {{name}} {{/each}} {{#if newProjectText}}
- {{newProjectText}} {{/if}}
{{newProjectTitle}}
{{projectNameErrorText}}
DS80C390
Documentation
Filters
1 Applied
Data Sheet
3
DS80C390: Dual CAN High-Speed Microprocessor Data Sheet (Rev.5)
DS80C390: 双CAN高速微处理器 Data Sheet
DS80C390: デュアルCAN高速マイクロプロセッサ Data Sheet
User Guide
2
Reliability Data
1
75.61K
Application Note
7
HTML
HTML
HTML
HTML
HTML
HTML
HTML
Technical Articles
10
HTML
HTML
HTML
HTML
HTML
HTML
HTML
HTML
HTML
HTML
Design Note
3
HTML
HTML
HTML
Documentation
Data Sheet 1
Reliability Data 1
User Guide 2
Application Note 7
Design Note 3
Technical Articles 7
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal. View our quality and reliability program and certifications for more information.
Part Model | Pin/Package Drawing | Documentation | CAD Symbols, Footprints, and 3D Models |
---|---|---|---|
DS80C390-FCR+ | 64-LQFP-10X10X1.4 |
|
|
DS80C390-FNR+ | 64-LQFP-10X10X1.4 |
|
|
DS80C390-QCR+ | Plastic Leaded Chip Carrier |
|
|
DS80C390-QNR+ | Plastic Leaded Chip Carrier |
|
- DS80C390-FCR+
- Pin/Package Drawing
- 64-LQFP-10X10X1.4
- Documentation
- HTML Material Declaration
- HTML Reliablity Data
- CAD Symbols, Footprints, and 3D Models
- Ultra Librarian
- SamacSys
- DS80C390-FNR+
- Pin/Package Drawing
- 64-LQFP-10X10X1.4
- Documentation
- HTML Material Declaration
- HTML Reliablity Data
- CAD Symbols, Footprints, and 3D Models
- Ultra Librarian
- SamacSys
- DS80C390-QCR+
- Pin/Package Drawing
- Plastic Leaded Chip Carrier
- Documentation
- HTML Material Declaration
- HTML Reliablity Data
- CAD Symbols, Footprints, and 3D Models
- Ultra Librarian
- SamacSys
- DS80C390-QNR+
- Pin/Package Drawing
- Plastic Leaded Chip Carrier
- Documentation
- HTML Material Declaration
- HTML Reliablity Data
- CAD Symbols, Footprints, and 3D Models
- Ultra Librarian
- SamacSys
Filter by Model
Part Models
Product Lifecycle
PCN
Apr 23, 2024
- 2419N
ASSEMBLY
DS80C390-FCR+
PRODUCTION
DS80C390-FNR+
PRODUCTION
Sep 1, 2021
- 2181
ASSEMBLY
DS80C390-FCR+
PRODUCTION
DS80C390-FNR+
PRODUCTION
Filter by Model
Part Models
Product Lifecycle
PCN
Apr 23, 2024
- 2419N
ASSEMBLY
Sep 1, 2021
- 2181
ASSEMBLY