ADSP-2192

Obsolete

16-bit Fixed-Point DSP For Multichannel Applications

Data Sheet (Rev. 0) Product Selection Table

Viewing:

Overview

160MHz/320MIPS High-performance dual-core 16-bit device
Code-compatible with popular ADSP-218x family
2.4 Mbits on-chip SRAM; On-chip boot ROM

PCI 2.2 33MHz/32-bit compliant interface; Integrated USB 1.1-compliant interface
Fourteen DMA channels
Serial interface for external EPROM/EEPROM Devices

Dual-Core 320 MIPS Performance with PCI and USB Interface

The ADSP-2192 is a dual-core 16-bit fixed-point DSP optimized for multichannel voice/data and other high-speed numeric processing applications. It is the first product available based on ADI's new high performance ADSP-219x digital signal processor (DSP) core capable of 320 million instructions per second (MIPS). Future products on the ADSP-219x roadmap will follow two paths, one addressing high-performance requirements delivering up to 1200 MIPS and another addressing low power requirements needing less than 0.1 mW/MIPS.

It is the first product available based on ADI's new high-performance ADSP-219x digital signal processor (DSP) core capable of 320 million instructions per second (MIPS).

Building off its full code-compatibility with the entire ADSP-218x DSP family, the DSP cores used in the ADSP-2192 utilize the ADSP-2100 family base architecture consisting of three computational units, data address generators, and a program sequencer. The ADSP-2192 will also support a wide range of interfaces including: Peripheral Component Interconnect (PCI) with CardBus and Sub-ISA interface mode for embedded applications and Universal Serial Bus (USB) with interface to serial EPROM devices, AC'97 and DMA. Other ADSP-2192 highlights include a programmable timer for each core, extensive interrupt capabilities along with on-chip program and data memory.

With 132K words of on-chip memory, the ADSP-2192's first core processor (P0) is configured with 64K x 16-bit Data Memory, 16K x 24-bit Program Memory, and Boot ROM. The second core processor (P1) is configured with 32K x 16-bit Data Memory, 16K x 24-bit Program Memory, and Boot ROM. The ADSP-2192 also features 4K x 16-bit words of shared memory that will reduce external data accesses allowing a higher sustained processor performance.

Power-down circuitry is provided to meet the low-power needs of battery-operated portable equipment. The ADSP-2192 is available in a 144-pin LQFP package.

Fabricated in a high-speed, low-power, CMOS process, the ADSP-2192 operates with a 6.25-ns instruction cycle time (160MHz/320MIPS). The ADSP-2192's dual-core architecture and comprehensive instruction set enable the processors to perform multiple operations in parallel, and any two instructions can execute in a single DSP processor cycle.

Documentation

This is the most up-to-date revision of the Data Sheet.

Software Resources

Software & Tools Anomaly 1

Software and Tools Anomalies Search

Can't find the software or driver you need?

Tools & Simulations

ADSP-21xx Processors: Software and Tools

Open Tool

Evaluation Kits

USB-Based Emulator and High Performance USB-Based Emulator

Buy Now View Details

Features and Benefits

Full speed USB 1.1 interface enabling download speeds of up to 150 KB/Sec (ADZS-USB-ICE) or High speed USB 2.0 interface enabling download speeds of up to 1.5MB/sec (ADZS-HPUSB-ICE)
Background Telemetry Channel (BTC) support enabling non-intrusive data exchange at up to 2.0 MB/sec (ADZS-HPUSB-ICE only)
1.8V, 2.5V, and 3.3V compliant and tolerant
Support for all ADI JTAG processors and DSPs
5V tolerant and 3.3V compliant for 5V processors and DSPs
Multiprocessor support
14-pin JTAG connector
3-meter USB cable for difficult-to-reach targets
CE-certified

Product Details

Analog Devices’ cost-effective Universal Serial Bus (USB)-based emulator and High performance (HP) Universal Serial Bus (USB)-based emulator each provide an easy, portable, non-intrusive, target-based debugging solution for Analog Devices JTAG processors and DSPs. These powerful USB-based emulators perform a wide range of emulation functions, including single-step and full speed execution with pre-defined breakpoints, and viewing and/or altering of register and memory contents. With the ability to automatically detect and support multiple I/O voltages, the USB and HP USB emulators enable users to communicate with all of the Analog Devices JTAG processors and DSPs using either a full speed USB 1.1 or high speed USB 2.0 port on the host PC. Applications and data can easily and rapidly be tested and transferred between the emulators and the separately available VisualDSP++ development and debugging environment(sold separately).

The plug-and-play architecture of USB allows the emulators to be automatically detected and configured by the host operating system. It can also be connected to and disconnected from the host without opening the PC or turning off the power to the PC. A 3-meter cable is included to connect the emulators to the host PC, thus providing abundant accessibility to hard to reach targets.

The HP USB-based emulator also supports the Background Telemetry Channel (BTC), a non-intrusive method for exchanging data between the host and target application without affecting the target system's real-time characteristics.

Part Number:
USB-Based Emulator
Part Number: ADZS-USB-ICE
High Performance USB-Based Emulator
Part Number: ADZS-HPUSB-ICE

Tools Support:
Tel: 1-800-ANALOGD (262-5643)
Contact Support

For additional information, contact your local Analog Devices Sales Office or Distributor.

Resources

Blackfin Evaluation Kits
1/1/0001

Getting Started With Blackfin Processors (Rev.6.0)
6/16/2016

Latest Discussions

No discussions on ADSP-2192 yet. Have something to say?

Start a Discussion on EngineerZone®

ADSP-2192

Overview

Documentation

Data Sheet 1

User Guide 2

Application Note 55

Technical Articles 2

Processor Manual 5

Product Highlight 1

Software Manual 9

Integrated Circuit Anomaly 1

Legacy Emulator Manual 2