Not the part you were looking for?
Ask a Question
Submit your question below and we will return the best answer from ADI’s knowledge database:
Other places you can find help
Support
Analog Devices Support Portal is a one-stop shop to answer all your ADI questions.
Visit the ADI Support PageFeatures
- CMOS 8-Bit 32 MSPS Sampling A/D Converter
- Pin-Compatible with AD876-8
- Power Dissipation: 95 mW (3 V Supply)
- Operation Between +2.7 V and +5.5 V Supply
- Differential Nonlinearity: 0.2 LSB
- Power-Down (Sleep) Mode
- Three-State Outputs
- See datasheet for additional features
The AD9280 is a monolithic, single supply, 8-bit, 32 MSPS analog-to-digital converter with an on-chip sample-and-hold amplifier and voltage reference. The AD9280 uses a multistage differential pipeline architecture at 32 MSPS data rates and guarantees no missing codes over the full operating temperature range.
The input of the AD9280 has been designed to ease the development of both imaging and communications systems. The user can select a variety of input ranges and offsets and can drive the input either single-ended or differentially.
The sample-and-hold amplifier (SHA) is equally suited for both multiplexed systems that switch full-scale voltage levels in successive channels and sampling single-channel inputs at frequencies up to and beyond the Nyquist rate. AC-coupled input signals can be shifted to a predetermined level, with an onboard clamp circuit. The dynamic performance is excellent.
The AD9280 has an onboard programmable reference. An external reference can also be chosen to suit the dc accuracy and temperature drift requirements of the application.
A single clock input is used to control all internal conversion cycles. The digital output data is presented in straight binary output format. An out-of-range signal (OTR) indicates an overflow condition which can be used with the most significant bit to determine low or high overflow.
The AD9280 can operate with a supply range from +2.7 V to +5.5 V, ideally suiting it for low power operation in high speed applications.
The AD9280 is specified over the industrial (-40°C to +85°C) temperature range.
PRODUCT HIGHLIGHTS
- Low Power
The AD9280 consumes 95 mW on a 3 V supply (excluding the reference power). In sleep mode, power is reduced to below 5 mW. - Very Small Package
The AD9280 is available in a 28-lead SSOP package. - Pin Compatible with AD876-8
The AD9280 is pin compatible with the AD876-8, allowing older designs to migrate to lower supply voltages. - 300 MHz Onboard Sample-and-Hold
The versatile SHA input can be configured for either singleended or differential inputs. - Out-of-Range Indicator
The OTR output bit indicates when the input signal is beyond the AD9280’s input range. - Built-In Clamp Function
Allows dc restoration of video signals.
Ask a Question
Submit your question below and we will return the best answer from ADI’s knowledge database:
Other places you can find help
Support
Analog Devices Support Portal is a one-stop shop to answer all your ADI questions.
Visit the ADI Support Page{{modalTitle}}
{{modalDescription}}
{{dropdownTitle}}
- {{defaultSelectedText}} {{#each projectNames}}
- {{name}} {{/each}} {{#if newProjectText}}
- {{newProjectText}} {{/if}}
{{newProjectTitle}}
{{projectNameErrorText}}
AD9280
Documentation
Filters
1 Applied
Data Sheet
2
Application Note
29
359 kB
1076 kB
823 kB
491 kB
1559 kB
1606 kB
HTML
HTML
HTML
HTML
HTML
HTML
HTML
HTML
HTML
Technical Articles
8
URL
URL
HTML
HTML
HTML
HTML
HTML
HTML
Evaluation Design File
1
URL
Documentation
Data Sheet 1
Application Note 10
Technical Articles 4
Evaluation Design File 1
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal. View our quality and reliability program and certifications for more information.
Part Model | Pin/Package Drawing | Documentation | CAD Symbols, Footprints, and 3D Models |
---|---|---|---|
AD9280ARSZ | 28-Lead SSOP |
|
|
AD9280ARSZRL | 28-Lead SSOP |
|
- AD9280ARSZ
- Pin/Package Drawing
- 28-Lead SSOP
- Documentation
- HTML Material Declaration
- HTML Reliablity Data
- CAD Symbols, Footprints, and 3D Models
- Ultra Librarian
- SamacSys
- AD9280ARSZRL
- Pin/Package Drawing
- 28-Lead SSOP
- Documentation
- HTML Material Declaration
- HTML Reliablity Data
- CAD Symbols, Footprints, and 3D Models
- Ultra Librarian
- SamacSys
Filter by Model
Part Models
Product Lifecycle
PCN
Aug 25, 2010
- 10_0065
Halogen Free Material Change for SSOP Products at Carsem
AD9280ARSZ
PRODUCTION
AD9280ARSZRL
PRODUCTION
Aug 17, 2010
- 10_0225
AD9200/AD9280 Wafer Fabrication qualification at ADI's Limerick Manufacturing Location
AD9280ARSZ
PRODUCTION
AD9280ARSZRL
PRODUCTION
Apr 21, 2010
- 10_0059
Pin Configuration Description Change on Select Models of AD9280
AD9280ARSZ
PRODUCTION
AD9280ARSZRL
PRODUCTION
Filter by Model
Part Models
Product Lifecycle
PCN
Aug 25, 2010
- 10_0065
Halogen Free Material Change for SSOP Products at Carsem
AD9280ARSZ
PRODUCTION
AD9280ARSZRL
PRODUCTION
Aug 17, 2010
- 10_0225
AD9200/AD9280 Wafer Fabrication qualification at ADI's Limerick Manufacturing Location
AD9280ARSZ
PRODUCTION
AD9280ARSZRL
PRODUCTION
Apr 21, 2010
- 10_0059
Pin Configuration Description Change on Select Models of AD9280
AD9280ARSZ
PRODUCTION
AD9280ARSZRL
PRODUCTION