AD9200: Complete 10-Bit, 20 MSPS, 80mW CMOS A/D Converter Data Sheet (Rev. E)5/2/1997338 kB
Features and Benefits
- CMOS 10-Bit, 20 MSPS Sampling A/D Converter
- Pin-Compatible with AD876
- Power Dissipation: 80 mW (3 V Supply)
- Operation Between 2.7 V and 5.5 V Supply
- Differential Nonlinearity: 0.5 LSB
- Power-Down (Sleep) Mode
- Three-State Outputs
- See datasheet for additional features
The AD9200 is a monolithic, single supply, 10-bit, 20 MSPS analog-to-digital converter with an on-chip sample-and-hold amplifier and voltage reference. The AD9200 uses a multistage differential pipeline architecture at 20 MSPS data rates and guarantees no missing codes over the full operating temperature range.
The input of the AD9200 has been designed to ease the development of both imaging and communications systems. The user can select a variety of input ranges and offsets and can drive the input either single-ended or differentially.
The sample-and-hold (SHA) amplifier is equally suited for both multiplexed systems that switch full-scale voltage levels in successive channels and sampling single-channel inputs at frequencies up to and beyond the Nyquist rate. AC coupled input signals can be shifted to a predetermined level, with an onboard clamp circuit (AD9200ARS, AD9200KST). The dynamic performance is excellent.
The AD9200 has an onboard programmable reference. An external reference can also be chosen to suit the dc accuracy and temperature drift requirements of the application.
A single clock input is used to control all internal conversion cycles. The digital output data is presented in straight binary output format. An out-of-range signal (OTR) indicates an overflow condition which can be used with the most significant bit to determine low or high overflow.
The AD9200 can operate with supply range from 2.7 V to 5.5 V, ideally suiting it for low power operation in high speed portable applications.
The AD9200 is specified over the industrial (40°C to +85°C) and commercial (0°C to +70°C) temperature ranges.
- Low Power
The AD9200 consumes 80 mW on a 3 V supply (excluding the reference power). In sleep mode, power is reduced to below 5 mW.
- Very Small Package
The AD9200 is available in both a 28-lead SSOP and 48-lead LQFP packages.
- Pin Compatible with AD876
The AD9200 is pin compatible with the AD876, allowing older designs to migrate to lower supply voltages.
- 300 MHz On-Board Sample-and-Hold
The versatile SHA input can be configured for either single-ended or differential inputs.
- Out-of-Range Indicator
The OTR output bit indicates when the input signal is beyond the AD9200’s input range.
- Built-In Clamp Function
Allows dc restoration of video signals with AD9200ARS and AD9200KST.
Product Lifecycle Production
At least one model within this product family is in production and available for purchase. The product is appropriate for new designs but newer alternatives may exist.
Documentation & Resources
AN-905: VisualAnalog™ Converter Evaluation Tool Version 1.0 User Manual8/18/2020
AN-835: Understanding High Speed ADC Testing and Evaluation (Rev. B)5/12/2015985 kB
AN-501: Aperture Uncertainty and ADC System Performance (Rev. A)2/14/2015227 K
AN-282: Fundamentals of Sampled Data Systems2/14/20152131 kB
AN-756: Sampled Systems and the Effects of Clock Phase Noise and Jitter (Rev. 0)2/14/2015291K
AN-935: Designing an ADC Transformer-Coupled Front End (Rev. 0)2/14/2015363 kB
AN-345: Grounding for Low-and-High-Frequency Circuits2/14/2015455 kB
AN-737: How ADIsimADC Models an ADC (Rev. B)11/9/2007373 kB
AN-715: A First Approach to IBIS Models: What They Are and How They Are Generated (Rev. 0)12/14/2004370K
AN-741: Little Known Characteristics of Phase Noise (Rev. 0)11/29/20041679 kB
AN-302: Exploit Digital Advantages in an SSB Receiver1/1/2000417 kB
Tools & Simulations
For designers who are selecting or evaluating high speed ADCs, VisualAnalog™ is a software package that combines a powerful set of simulation and data analysis tools with a user-friendly graphical interface.
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal.View our quality and reliability program and certifications for more information.
|Part Number||Material Declaration||Reliability Data||Pin/Package Drawing||CAD Symbols, Footprints & 3D Models|
|AD9200ARS||Material Declaration||Reliability Data||28-Lead SSOP|
|AD9200ARSZ||Material Declaration||Reliability Data||28-Lead SSOP|
|AD9200ARSZRL||Material Declaration||Reliability Data||28-Lead SSOP|
|AD9200JRSZ||Material Declaration||Reliability Data||28-Lead SSOP|
|AD9200JRSZRL||Material Declaration||Reliability Data||28-Lead SSOP|
|Wafer Fabrication Data|
Select a model from the dropdown below to subscribe to PCN/PDN notifications and view past notifications as well.
Support & Discussions
Sample & Buy
See our Ordering FAQs for answers to questions about online orders, payment options and more.
Buy Now Pricing
(**) Displayed Buy Now Price and Price Range is based on small quantity orders.
(*)The 1Ku list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
Please see the latest communication from our CCO regarding lead times.
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.