Features and Benefits
- High resolution analog-to-digital converter (ADC)
24 bits no missing codes
- Optimized for fast channel switching
18-bit p-p resolution (21 bits effective) at 500 Hz
16-bit p-p resolution (19 bits effective) at 2 kHz
14-bit p-p resolution (18 bits effective) at 15 kHz
On-chip per channel system calibration
- 4 single-ended analog inputs
Input ranges +5 V, ±5 V, +10 V, ±10 V
Up to ±16.5 V not affecting adjacent channel
Up to ±50 V absolute maximum
- See data sheet for additional features
The AD7734 is a high precision, high throughput analog front end. True 16-bit p-p resolution is achievable with a total conversion time of 500 μs (2 kHz channel switching), making it ideally suitable for high resolution multiplexing applications.
The device can be configured via a simple digital interface, which allows users to balance the noise performance against data throughput up to a 15.4 kHz.
The analog front end features four single-ended input channels with unipolar or true bipolar input ranges to ±10 V while operating from a single +5 V analog supply. The device has an overrange and underrange detection capability and accepts an analog input overvoltage to ±16.5 V without degrading the performance of the adjacent channels.
The differential reference input features “No-Reference” detect capability. The ADC also supports per channel system calibration options. The digital serial interface can be configured for 3-wire operation and is compatible with microcontrollers and digital signal processors. All interface inputs are Schmitt triggered.
The device is specified for operation over the extended industrial temperature range of –40°C to +105°C.
The AD7732 is similar to AD7734, but its analog front end features two fully differential input channels.
The AD7738 analog front end is configurable for four fully differential or eight single-ended input channels, features 0.625 V to 2.5 V bipolar/unipolar input ranges, and accepts a common-mode input voltage from 200 mV to AVDD–300 mV. The AD7738 multiplexer output is pinned out externally, allowing the user to implement programmable gain or signal conditioning before being applied to the ADC.
- Multiplexing applications
- Process control
- Industrial instrumentation
Product Lifecycle Production
At least one model within this product family is in production and available for purchase. The product is appropriate for new designs but newer alternatives may exist.
Evaluation Kits (1)
The EVAL-AD7734EBZ is a fully featured evaluation Board for the AD7734. The evaluation board can be connected to a PC via the PC COM serial port. Software is provided enabling the user to perform detailed analysis of the ADC's performance.
Documentation & Resources
AN-202: An IC Amplifier User’s Guide to Decoupling, Grounding, and Making Things Go Right for a Change (Rev. B)2/14/2015
AN-389: Using Sigma-Delta Converters-Part 22/14/2015
AN-388: Using Sigma-Delta Converters-Part 12/14/2015
AN-311: How to Reliably Protect CMOS Circuits Against Power Supply Overvoltaging3/8/2008
AN-607: Selecting a Low Bandwidth (<15 kSPS) Sigma-Delta ADC (Rev. E)10/12/2006
AN-615: Peak-to-Peak Resolution Versus Effective Resolution (Rev. 0)12/21/2004
AN-397: Electrically Induced Damage to Standard Linear Integrated Circuits:11/18/2002
AN-283: Sigma-Delta ADCs and DACs9/24/2002
AN-626: Using the AD7732/AD7734/AD7738/AD7739 Checksum Register (Rev. 0)1/1/2000
AN-663: AD7732/AD7734/AD7738/AD7739 Calibration Registers (Rev. 0)1/1/2000
AN-664: AD7732/AD7734/AD7738/AD7739 in Low Power Applications (Rev. 0)1/1/2000
Designing Power Supplies for High Speed ADC2/1/2012
Delta-Sigma Rocks RF, As ADC Designers Jump On Jitter1/12/2006
Part 2: Circuit Suggestions Using Features and Functionality of New Sigma-Delta ADCs6/1/2002
Part 1: Circuit Suggestions Using Features and Functionality of New Sigma-Delta ADCs10/1/2001
Software & Systems Requirements
Tools & Simulations
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal.
Sample & Buy
See our Ordering FAQs for answers to questions about online orders, payment options and more.
The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Analog Devices, Inc. sales office or authorized distributor. Pricing displayed for Evaluation Boards and Kits is based on 1-piece pricing.
Selecting the Sample button above will redirect to the third-party ADI Sample Site. The part selected will carry over to your cart on this site once logged in. Please create a new account there if you have never used the site before. Contact SampleSupport@analog.com with any questions regarding this Sample Site.
Pricing displayed is based on 1-piece.
Up to two boards can be purchased through Analog.com. To order more than two, please purchase through one of our listed distributors.
Pricing displayed is based on 1-piece. The USA list pricing shown is for budgetary use only, shown in United States dollars (FOB USA per unit), and is subject to change. International prices may vary due to local duties, taxes, fees and exchange rates.