LTC3409

PRODUCTION

600mA Low VIN Buck Regulator in 3mm × 3mm DFN

Viewing:

Overview

  • 1.6V to 5.5V Input Voltage Range
  • Internal Soft-Start
  • Selectable 1.7MHz or 2.6MHz Constant Frequency Operation
  • Internal Oscillator can be Synchronizable to an External Clock, 1MHz to 3MHz Range
  • High Efficiency: Up to 95%
  • Very Low Quiescent Current: Only 65µA During Burst Mode® Operation
  • 600mA Output Current (VIN = 1.8V, VOUT = 1.2V)
  • 750mA Peak Inductor Current
  • No Schottky Diode Required
  • Low Dropout Operation: 100% Duty Cycle
  • 0.613V Reference Voltage
  • Stable with Ceramic Capacitors
  • Shutdown Mode Draws <1µA Supply Current
  • Current Mode Operation for Excellent Line and Load Transient Response
  • Overtemperature Protection
  • Available in a Low Profile (0.75mm) 8-Lead (3mm × 3mm) DFN Package

The LTC3409 is a high efficiency, monolithic synchronous buck regulator using a constant frequency, current mode architecture. The output voltage is adjusted via an external resistor divider.

Fixed switching frequencies of 1.7MHz and 2.6MHz are supported. Alternatively, an internal PLL will synchronize to an external clock in the frequency range of 1MHz to 3MHz. This range of switching frequencies allows the use of small surface mount inductors and capacitors, including ceramics.

Supply current during Burst Mode operation is only 65µA dropping to <1µA in shutdown. The 1.6V to 5.5V input voltage range makes the LTC3409 ideally suited for single cell Li-Ion, Li-Metal and 2-cell alkaline, NiCd or NiMH battery-powered applications. 100% duty cycle capability provides low dropout operation, extending battery life in portable systems. Burst Mode operation can be user enabled, increasing efficiency at light loads, further extending battery life.

The internal synchronous switch increases efficiency and eliminates the need for an external Schottky diode. Internal soft-start offers controlled output voltage rise time at start-up without the need for external components.

Protected by U.S. Patents, including 5481178, 6580258, 6304066, 6127815, 6498466, 6611131.

Vout Range
LTC3409 ±5%
LTC3409A ±3%

Applications

  • Cellular Phones
  • Digital Cameras
  • MP3 Players

LTC3409
600mA Low VIN Buck Regulator in 3mm × 3mm DFN
High Efficiency Step-Down Converter Burst Mode Efficiency, 1.8VOUT Product Package 1
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet

This is the most up-to-date revision of the Data Sheet.

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Hardware Ecosystem

Parts Product Life Cycle Description
Oscillators 1
LTC6908 Resistor Set SOT-23 Oscillator with Spread Spectrum Modulation
Power System Management (PSM) & Sequencers 1
LTC2974 RECOMMENDED FOR NEW DESIGNS 4-Channel PMBus Power System Manager Featuring Accurate Output Current Measurement
Supervisory Circuits & Reset ICs 1
LTC2934 PRODUCTION Ultra-Low Power Adjustable Supervisor with Power-Fail Output
Switching Regulators & Controllers 1
LTC3880 RECOMMENDED FOR NEW DESIGNS Dual Output PolyPhase Step-Down DC/DC Controller with Digital Power System Management
Modal heading
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project

Tools & Simulations

LTspice 1


Models for the following parts are available in LTspice:

  • LTC3409

LTpowerCAD 1


Design tools for the following parts are available in LTpowerCAD:

  • LTC3409
LTspice

LTspice® is a powerful, fast and free simulation software, schematic capture and waveform viewer with enhancements and models for improving the simulation of analog circuits.

LTpowerCAD

LTpowerCAD® is a power supply design program which selects power stage components, provides detailed power efficiency, shows quick loop Bode plot stability and load transient analysis, and can export to LTspice for simulation.


Evaluation Kits

eval board
DC828A

LTC3409EDD Demo Board | 1.6V ≤ VIN ≤ 5.5V, VOUT = 1.2V/1.5V/1.8V @ 600mA

Product Details

Demonstration circuit 828 is a step-down converter using the LTC3409 monolithic synchronous buck regulator. The DC828 has an input voltage range of 1.6V to 5.5V and is capable of delivering up to 600mA of output current at a minimum input voltage of 1.8V. The jumper-selectable output voltage can be set to 1.2V, 1.5V or 1.8V.

DC828A
LTC3409EDD Demo Board | 1.6V ≤ VIN ≤ 5.5V, VOUT = 1.2V/1.5V/1.8V @ 600mA
DC828A - Schematic

Latest Discussions

No discussions on LTC3409 yet. Have something to say?

Start a Discussion on EngineerZone®

Recently Viewed