HMC539

Obsolete

0.25 dB LSB 5-Bit Digital Attenuator SMT, DC - 4 GHz

Viewing:

Overview

  • 0.25 dB LSB Steps to 7.75 dB
  • ±0.05 dB Typical Step Error
  • Low Insertion Loss: 0.7 dB
  • High IP3: +50 dBm
  • Single Control Line Per Bit
  • TTL/CMOS Compatible Control
  • Single +5V Supply
  • 3x3 mm SMT Package

The HMC539LP3(E) is a broadband 5-bit GaAs IC digital attenuator in low cost leadsurface mount package. This single positive control line per bit digital attenuator utilizes an off chip AC ground capacitor for near DC operation, making it suitable for a wide variety of RF and IF applications. Covering DC to 4.0 GHz, the insertion loss is less than 0.7 dB typical. The attenuator bit values are 0.25 (LSB), 0.5, 1, 2, and 4 dB for a total attenuation of 7.75 dB. Attenuation accuracy is excellent at ± 0.05 dB typical step error. The attenuator also features a high IIP3 of +50 dBm. Five TTL/CMOS control inputs are used to select each attenuation state. A single Vdd bias of +5V is required.

Applications

  • Cellular Infrastructure 
  • ISM, MMDS, WLAN, WiMAX, WiBro 
  • Microwave Radio & VSAT 
  • Test Equipment and Sensors

Suggested Replacement Parts

HMC539A RECOMMENDED FOR NEW DESIGNS

0.25 dB LSB GaAs MMIC 5-BIT Digital Positive Control Attenuator, DC - 4 GHz

HMC539
0.25 dB LSB 5-Bit Digital Attenuator SMT, DC - 4 GHz
hmc539lp3_fbl
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Obsolete Data Sheet 1

Data Sheet

This is the most up-to-date revision of the Data Sheet.

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Hardware Ecosystem

Parts Product Life Cycle Description
HMC539A RECOMMENDED FOR NEW DESIGNS

0.25 dB LSB GaAs MMIC 5-BIT Digital Positive Control Attenuator, DC - 4 GHz

Modal heading
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project

Tools & Simulations

S-Parameter 1


Evaluation Kits

EVAL-HMC539LP3
HMC539LP3 Evaluation Board

Latest Discussions

Recently Viewed