ADL5604

PRODUCTION

700 MHz TO 2700 MHz 1 W RF Driver Amplifier

Data Sheet (Rev. C) Product Selection Table
Viewing:

Overview

  • Operation from 700 MHz to 2700 MHz
  • Gain of 12.2 dB at 2630 MHz
  • OIP3 of 42.2 dBm at 2630 MHz
  • P1dB of 29.1 dBm at 2630 MHz
  • Noise figure of 4.6 dB at 2630 MHz
  • Single 5 V power supply
  • Low quiescent current of 318 mA
  • Internal active biasing
  • Fast power-down/up time of 50 ns
  • Easily externally matched
  • Compact 4 mm × 4 mm LFCSP
  • ESD rating of ±1 kV (Class 1C)

The ADL5604 is a very broadband RF driver amplifier that operates over the wide frequency range of 700 MHz to 2700 MHz. The ADL5604 is also highly linear and has a very low power consumption, enabling the driver to be packaged in a compact 16-lead, 4 mm × 4 mm LFCSP.

For thermal management, the ADL5604 uses an exposed paddle, and the upper and lower pins of the package are all grounded, which gives the ADL5604 excellent thermal transfer characteristics.

The ADL5604 can be quickly powered down or up in 50 ns for applications requiring TX shutdown, such as TDD systems.

The ADL5604 operates on a single 5 V supply voltage and draws only 318 mA of supply current.

The driver is fabricated on a GaAs HBT process and operates from −40°C to +85°C. A fully populated evaluation board is available.
ADL5604
700 MHz TO 2700 MHz 1 W RF Driver Amplifier
ADL5604 Functional Block Diagram ADL5604 Pin Configuration
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet 1

Application Note 2

Evaluation Design File 1

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Tools & Simulations

ADIsimRF

ADIsimRF is an easy-to-use RF signal chain calculator. Cascaded gain, noise, distortion and power consumption can be calculated, plotted and exported for signal chains with up to 50 stages. ADIsimRF also includes an extensive data base of device models for ADI’s RF and mixed signal components.

Open Tool

ADIsimPLL™

ADIsimPLL enables the rapid and reliable evaluation of new high performance PLL products from ADI. It is the most comprehensive PLL Synthesizer design and simulation tool available today. Simulations performed include all key non-linear effects that are significant in affecting PLL performance. ADIsimPLL removes at least one iteration from the design process, thereby speeding the design- to-market.

Open Tool

Sys-Parameter Models for Keysight Genesys

Sys-Parameter models contain behavioral parameters, such as P1dB, IP3, gain, noise figure and return loss, which describe nonlinear and linear characteristics of a device.

Open Tool

S-Parameter 1

Evaluation Kits

EVAL-ADL5604

ADL5604 Evaluation Board

Buy Now View Details

Product Details

ADL5604-EVALZ is a fully populated, 4-layer, FR4-based evaluation board. It requires 5 V/500 mA power supply for normal operation. The 5 V power supply should be connected to the vector leads, labeled VCC1 and GND1. RFIN is the RF input port, and RFOUT is the RF output port. Both ports are populated with edge-mounted SMA connectors. The board is configured for 2140 MHz operation, and provides the footprints for power down circuitry.
EVAL-ADL5604
ADL5604 Evaluation Board

Latest Discussions

1 Years Ago
Update Keyword Interceptor
2 Years Ago
Please update these interceptor files in Microwave and RF Community
2 Years Ago
Inceptor Update Request
View related discussion on EngineerZone®

Recently Viewed