AD8217

PRODUCTION

High Resolution, Zero-Drift Current Shunt Monitor

Viewing:

Overview

  • High common-mode voltage range
    4.5 V to 80 V operating
    0 V to 85 V survival
  • Buffered output voltage
  • Wide operating temperature range: −40°C to +125°C
  • Excellent ac and dc performance
    ±100 nV/°C typical offset drift
    ±100 μV typical offset
    ±5 ppm/°C typical gain drift
    100 dB typical CMRR at dc

The AD8217 is a high voltage, high-resolution current shunt amplifier. It features a set gain of 20 V/V, with a maximum ±0.35% gain error over the entire temperature range. The buffered output voltage directly interfaces with any typical converter. The AD8217 offers excellent common-mode rejection from 4.5 V to 80 V, and includes an internal LDO, which directly powers the device from the high voltage rail. Therefore, no addi-tional supply is necessary, provided that the input common-mode range is 4.5 V to 80 V. The AD8217 performs unidirectional current measurements across a shunt resistor in a variety of industrial and telecom applications including motor control, battery management, and base station power amplifier bias control.

The AD8217 offers breakthrough performance throughout the −40°C to +125°C temperature range. It features a zero-drift core, which leads to a typical offset drift of ±100 nV/°C throughout the operating temperature and common-mode voltage range. Special attention is devoted to output linearity being maintained throughout the input differential voltage range of 0 mV to 250 mV, regardless of the common-mode voltage present, and the typical input offset voltage is ±100 μV. The AD8217 is offered in a 8-lead MSOP package and is specified from −40°C to +125°C.

Applications
  • High side current sensing 48 V telecom Power management Base stations Unidirectional motor control Precision high voltage current sources

AD8217
High Resolution, Zero-Drift Current Shunt Monitor
AD8217-fbl
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Software Resources

Can't find the software or driver you need?

Request a Driver/Software

Tools & Simulations

Latest Discussions

Recently Viewed