MAX77533
RECOMMENDED FOR NEW DESIGNS14V Input, 1.5A High-Efficiency Buck Converter with 9μA ISUP
Save Power and Board Space with Small Solution Size
- Part Models
- 8
- 1ku List Price
- Starting From $0.61
Overview
- 1.5A Single Channel Buck Regulator
- 3V to 14V Input Voltage Range
- Output Voltage Range
- 0.8V to 5V I2C Programmable in 50mV Steps Internal Feedback
- 1.2V, 1.8V, or 3.3V Factory Preset Options Internal Feedback
- 0.8V to 99%VSUP with External Feedback Resistors
- High-Efficiency, Low Supply Current Extends Battery Life
- 94% Peak Efficiency at 7.4VSUP, 3.3VOUT (2520 Inductor)
- 9μA ISUP (12VSUP, 1.8VOUT Internal Feedback Version)
- Selectable Light-Load SKIP and Forced-PWM Modes
- 1MHz or 550kHz Fixed-Frequency Switching
- Hardware or Software Control
- Enable Input and Power-OK Output Pins
- Optional I2C Full Control Interface
- Protection Features
- Cycle-by-Cycle Inductor Peak Current Limit
- Short-Circuit Hiccup Mode, UVLO, and Thermal Shutdown Protections
- 1ms Default Soft-Start
- Small Size
- 1.85mm x 1.4mm (0.7mm max. height) WLP
- 12-Bump, 0.4mm Pitch, 3 x 4 Array
The MAX77533 is a synchronous 1.5A step-down DC-DC converter optimized for portable 2-cell and 3-cell battery-operated and USB-C applications. The converter operates on an input supply between 3V and 14V. Output voltage is adjustable between 0.8V and 5V in 50mV steps through an I2C serial interface (internal feedback) or 0.8V to 99% of the supply voltage with external feedback resistors. Factory-programmed default voltages of 1.2V, 1.8V, and 3.3V with internal feedback are offered to reduce component count for common rails. The device features a low-IQ SKIP mode which allows excellent efficiency at light loads.
Dedicated enable and power-OK (POK) pins allow simple hardware control. An I2C serial interface is optionally used for full configuration and control for dynamic voltage scaling and system power optimization.
Built-in undervoltage lockout (UVLO), output active discharge, cycle-by-cycle current limit, thermal shutdown, and short-circuit protection ensure safe operation under abnormal operating conditions.
The MAX77533 is available in a 12-bump, 0.4mm pitch wafer-level package (WLP).
Applications
- 2-cell/3-cell High Power Density Supplies
- Drones, HD Cameras, and Notebook Computers
- Portable Li+/Li-ion Battery Powered Devices
- Space-Constrained Portable Electronics
Documentation
Data Sheet 1
ADI has always placed the highest emphasis on delivering products that meet the maximum levels of quality and reliability. We achieve this by incorporating quality and reliability checks in every scope of product and process design, and in the manufacturing process as well. "Zero defects" for shipped products is always our goal. View our quality and reliability program and certifications for more information.
| Part Model | Pin/Package Drawing | Documentation | CAD Symbols, Footprints, and 3D Models |
|---|---|---|---|
| MAX77533AEWC+ | Wafer-Level Package 4x3 Bump, Full Array | ||
| MAX77533AEWC+T | Wafer-Level Package 4x3 Bump, Full Array | ||
| MAX77533BEWC12+ | Wafer-Level Package 4x3 Bump, Full Array | ||
| MAX77533BEWC12+T | Wafer-Level Package 4x3 Bump, Full Array | ||
| MAX77533BEWC33+ | Wafer-Level Package 4x3 Bump, Full Array | ||
| MAX77533BEWC33+T | Wafer-Level Package 4x3 Bump, Full Array | ||
| MAX77533QEWC+ | Wafer-Level Package 4x3 Bump, Full Array | ||
| MAX77533QEWC+T | Wafer-Level Package 4x3 Bump, Full Array |
| Part Models | Product Lifecycle | PCN |
|---|---|---|
|
Feb 21, 2025 - 2452N ASSEMBLY |
||
| MAX77533AEWC+ | PRODUCTION | |
| MAX77533AEWC+T | PRODUCTION | |
| MAX77533BEWC33+ | PRODUCTION | |
| MAX77533BEWC33+T | PRODUCTION | |
This is the most up-to-date revision of the Data Sheet.
Software Resources
Can't find the software or driver you need?
Request a Driver/SoftwareTools & Simulations
ADI Power Studio™ Designer
ADI Power Studio™ Designer is the next-generation tool for IC-level, power supply design, guiding engineers to faster, validated solutions.
Learn MoreSoftware Development 1
SIMPLIS Models 1
Evaluation Kits
Evaluation Kit for the MAX77533
Evaluation Kit for the MAX77533
Evaluation Kit for the MAX77533
Evaluation Kit for the MAX77533