MAX5863

LAST TIME BUY

Ultra-Low-Power, High-Dynamic Performance, 7.5Msps Analog Front End

Data Sheet (Rev. 1) Product Selection Table
Viewing:

Overview

  • Integrated Dual 8-Bit ADCs and Dual 10-Bit DACs
  • Ultra-Low Power
    • 22.8mW at fCLK = 7.5MHz (Transceiver Mode)
    • 20.7mW at fCLK = 5.2MHz (Transceiver Mode)
    • Low-Current Idle and Shutdown Modes
  • Excellent Dynamic Performance
    • 48.5dB SINAD at fIN = 1.875MHz (ADC)
    • 73dBc SFDR at fOUT = 620kHz (DAC)
  • Excellent Gain/Phase Match
    • ±0.03° Phase, ±0.03dB Gain at fIN = 1.875MHz (ADC)
  • Internal/External Reference Option
  • +1.8V to +3.3V Digital Output Level (TTL/CMOS Compatible)
  • Multiplexed Parallel Digital Input/Output for ADCs/DACs
  • Miniature 48-Pin Thin QFN Package (7mm x 7mm)
  • Evaluation Kit Available (Order MAX5865EVKIT)

The MAX5863 ultra-low-power, highly integrated analog front end is ideal for portable communication equipment such as handsets, PDAs, WLAN, and 3G wireless terminals. The MAX5863 integrates dual 8-bit receive ADCs and dual 10-bit transmit DACs while providing the highest dynamic performance at ultra-low power. The ADCs' analog I-Q input amplifiers are fully differential and accept 1VP-P full-scale signals. Typical I-Q channel phase matching is ±0.03° and amplitude matching is ±0.03dB. The ADCs feature 48.5dB SINAD and 69dBc spurious-free dynamic range (SFDR) at fIN = 1.875MHz and fCLK = 7.5Msps. The DACs' analog I-Q outputs are fully differential with ±400mV full-scale output, and 1.4V common-mode level. Typical I-Q channel phase match is ±0.15° and gain match is ±0.05dB. The DACs also feature dual 10-bit resolution with 73dBc SFDR, and 61dB SNR at fOUT = 620kHz and fCLK = 7.5MHz.

The ADCs and DACs operate simultaneously or independently for frequency-division duplex (FDD) and time-division duplex (TDD) modes. A 3-wire serial interface controls power-down and transceiver modes of operation. The typical operating power is 22.8mW at fCLK = 7.5Msps with the ADCs and DACs operating simultaneously in transceiver mode. The MAX5863 features an internal 1.024V voltage reference that is stable over the entire operating power-supply range and temperature range. The MAX5863 operates on a +2.7V to +3.3V analog power supply and a +1.8V to +3.3V digital I/O power supply for logic compatibility. The quiescent current is 3.5mA in Idle Mode™ and 1µA in shutdown mode. The MAX5863 is specified for the extended (-40°C to +85°C) temperature range and is available in a 48-pin thin QFN package.

Applications

  • 3G Wireless Terminals
  • Fixed/Mobile Broadband Wireless Modems
  • Narrowband/Wideband CDMA Handsets
  • PDAs
MAX5863
Ultra-Low-Power, High-Dynamic Performance, 7.5Msps Analog Front End
MAX5863: Functional Diagram
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project
Ask a Question

Documentation

Data Sheet 1

Learn More
Add to myAnalog

Add media to the Resources section of myAnalog, to an existing project or to a new project.

Create New Project

Hardware Ecosystem

Parts Product Life Cycle Description
ADC/DAC Combo Converters 3
MAX5864
PRODUCTION Ultra-Low-Power, High-Dynamic-Performance, 22Msps Analog Front End
MAX5865
PRODUCTION Ultra-Low-Power, High-Dynamic-Performance, 40Msps Analog Front End
MAX5866
LAST TIME BUY Ultra-Low-Power, High-Dynamic-Performance, 60Msps Analog Front End
Modal heading
Add to myAnalog

Add product to the Products section of myAnalog (to receive notifications), to an existing project or to a new project.

Create New Project

Tools & Simulations

Software Development 1

Evaluation Kits

MAX5865EVKIT

Evaluation Kit for the MAX5863, MAX5864, MAX5865, and MAX5866

Buy Now View Details

Features and Benefits

  • Quick Dynamic Performance Evaluation
  • 50Ω Matched Clock Input and Analog Signal Lines
  • Single-Ended to Fully Differential Analog Input Signal Configuration
  • Differential to Single-Ended Output Signal-Conversion Circuitry
  • AC- or DC-Coupled Input Signals Configuration
  • SMA Coaxial Connectors for Clock Input, Analog Inputs, and Analog Output
  • On-Board Clock-Shaping Circuit
  • High-Speed PC Board Design
  • Fully Assembled and Tested
  • Windows-Compatible Software

Product Details

The MAX586x evaluation kit (EV kit) is a fully assembled and tested circuit board that contains all the components necessary to evaluate the performance of this family of analog front ends (AFEs’) that integrate a dual-channel analog-to-digital converter (ADC), a dual-channel digital-to- analog converter (DAC), and a 1.024V internal voltage reference. The EV kit board accepts AC- or DC-coupled, differential or single-ended analog inputs for the receive ADC and includes circuitry that converts the transmit DAC differential output signals to single-ended analog outputs. The EV kit includes circuitry that generates a clock signal from an AC sine wave input signal. The EV kit operates from a +3.0V analog power supply, +3.0V digital power supply, and ±5V bipolar power supply.

The EV kit comes with Windows® 7/10-compatible software that provides a simple graphical user interface (GUI) for exercising the programmable features of the MAX5863–MAX5866.

Windows is a registered trademark and registered service mark of Microsoft Corporation.

Applications

  • 3G Wireless Terminals and PDAs
  • Fixed/Mobile Broadband Wireless Modems
  • Narrowband/Wideband CDMA Handsets

MAX5866EVKIT

Evaluation Kit for the MAX5863, MAX5864, MAX5865, and MAX5866

Buy Now View Details

Features and Benefits

  • Quick Dynamic Performance Evaluation
  • 50Ω Matched Clock Input and Analog Signal Lines
  • Single-Ended to Fully Differential Analog Input Signal Configuration
  • Differential to Single-Ended Output Signal-Conversion Circuitry
  • AC- or DC-Coupled Input Signals Configuration
  • SMA Coaxial Connectors for Clock Input, Analog Inputs, and Analog Output
  • On-Board Clock-Shaping Circuit
  • High-Speed PC Board Design
  • Fully Assembled and Tested
  • Windows-Compatible Software

Product Details

The MAX586x evaluation kit (EV kit) is a fully assembled and tested circuit board that contains all the components necessary to evaluate the performance of this family of analog front ends (AFEs’) that integrate a dual-channel analog-to-digital converter (ADC), a dual-channel digital-to- analog converter (DAC), and a 1.024V internal voltage reference. The EV kit board accepts AC- or DC-coupled, differential or single-ended analog inputs for the receive ADC and includes circuitry that converts the transmit DAC differential output signals to single-ended analog outputs. The EV kit includes circuitry that generates a clock signal from an AC sine wave input signal. The EV kit operates from a +3.0V analog power supply, +3.0V digital power supply, and ±5V bipolar power supply.

The EV kit comes with Windows® 7/10-compatible software that provides a simple graphical user interface (GUI) for exercising the programmable features of the MAX5863–MAX5866.

Windows is a registered trademark and registered service mark of Microsoft Corporation.

Applications

  • 3G Wireless Terminals and PDAs
  • Fixed/Mobile Broadband Wireless Modems
  • Narrowband/Wideband CDMA Handsets

MAX5863EVKIT

Evaluation Kit for the MAX5863, MAX5864, MAX5865, and MAX5866

Buy Now View Details

Features and Benefits

  • Quick Dynamic Performance Evaluation
  • 50Ω Matched Clock Input and Analog Signal Lines
  • Single-Ended to Fully Differential Analog Input Signal Configuration
  • Differential to Single-Ended Output Signal-Conversion Circuitry
  • AC- or DC-Coupled Input Signals Configuration
  • SMA Coaxial Connectors for Clock Input, Analog Inputs, and Analog Output
  • On-Board Clock-Shaping Circuit
  • High-Speed PC Board Design
  • Fully Assembled and Tested
  • Windows-Compatible Software

Product Details

The MAX586x evaluation kit (EV kit) is a fully assembled and tested circuit board that contains all the components necessary to evaluate the performance of this family of analog front ends (AFEs’) that integrate a dual-channel analog-to-digital converter (ADC), a dual-channel digital-to- analog converter (DAC), and a 1.024V internal voltage reference. The EV kit board accepts AC- or DC-coupled, differential or single-ended analog inputs for the receive ADC and includes circuitry that converts the transmit DAC differential output signals to single-ended analog outputs. The EV kit includes circuitry that generates a clock signal from an AC sine wave input signal. The EV kit operates from a +3.0V analog power supply, +3.0V digital power supply, and ±5V bipolar power supply.

The EV kit comes with Windows® 7/10-compatible software that provides a simple graphical user interface (GUI) for exercising the programmable features of the MAX5863–MAX5866.

Windows is a registered trademark and registered service mark of Microsoft Corporation.

Applications

  • 3G Wireless Terminals and PDAs
  • Fixed/Mobile Broadband Wireless Modems
  • Narrowband/Wideband CDMA Handsets

MAX5864EVKIT

Evaluation Kit for the MAX5863, MAX5864, MAX5865, and MAX5866

Buy Now View Details

Features and Benefits

  • Quick Dynamic Performance Evaluation
  • 50Ω Matched Clock Input and Analog Signal Lines
  • Single-Ended to Fully Differential Analog Input Signal Configuration
  • Differential to Single-Ended Output Signal-Conversion Circuitry
  • AC- or DC-Coupled Input Signals Configuration
  • SMA Coaxial Connectors for Clock Input, Analog Inputs, and Analog Output
  • On-Board Clock-Shaping Circuit
  • High-Speed PC Board Design
  • Fully Assembled and Tested
  • Windows-Compatible Software

Product Details

The MAX586x evaluation kit (EV kit) is a fully assembled and tested circuit board that contains all the components necessary to evaluate the performance of this family of analog front ends (AFEs’) that integrate a dual-channel analog-to-digital converter (ADC), a dual-channel digital-to- analog converter (DAC), and a 1.024V internal voltage reference. The EV kit board accepts AC- or DC-coupled, differential or single-ended analog inputs for the receive ADC and includes circuitry that converts the transmit DAC differential output signals to single-ended analog outputs. The EV kit includes circuitry that generates a clock signal from an AC sine wave input signal. The EV kit operates from a +3.0V analog power supply, +3.0V digital power supply, and ±5V bipolar power supply.

The EV kit comes with Windows® 7/10-compatible software that provides a simple graphical user interface (GUI) for exercising the programmable features of the MAX5863–MAX5866.

Windows is a registered trademark and registered service mark of Microsoft Corporation.

Applications

  • 3G Wireless Terminals and PDAs
  • Fixed/Mobile Broadband Wireless Modems
  • Narrowband/Wideband CDMA Handsets
MAX5865EVKIT
Evaluation Kit for the MAX5863, MAX5864, MAX5865, and MAX5866
MAX5866EVKIT
Evaluation Kit for the MAX5863, MAX5864, MAX5865, and MAX5866
MAX5863EVKIT
Evaluation Kit for the MAX5863, MAX5864, MAX5865, and MAX5866
MAX5864EVKIT
Evaluation Kit for the MAX5863, MAX5864, MAX5865, and MAX5866

Latest Discussions

No discussions on MAX5863 yet. Have something to say?

Start a Discussion on EngineerZone®

Recently Viewed