When I used the AD9161 official verification board, the DAC SYNC signal could not be connected to the FPGA at the same time. According to the data, you only need to connect SYNC_N to the FPGA.

When I used the AD9161 official verification board, the DAC SYNC signal could not be connected to the FPGA at the same time. According to the data, you only need to connect SYNC_N to the FPGA.

我需要用AD9161来做一个信号干扰器，关键是大带宽，能有1.5GHz以上的瞬时带宽，比如压制干扰5~7.5GHz这个区段的所有信号